702724
51
Zoom out
Zoom in
Previous page
1/52
Next page
-50-
Declaration of conformity
The 4-channel auto-synchronous Active Infrared Barrier, type DIGITALK 2000, whether as a stand
alone or as a pillar-mounted integrated device, consists of:
Single unit transmitter and receiver, or
Pillar mounted transmitter and receiver
These products are in conformity with the standards on electromagnetic compatibility EMV
(89/336/EWG) in accordance with directives of the Council for Adaptation Adjustment. The comply with
the following electro-magnetic compatibility standards:
1. EN50081-2
2. EN50082-2
Technical Specification
single unit pillar mounted unit
Operating voltage 12-24 V AC or DC
Current consumption 70mA per pair (max. 100mA per pair)
Recommended range high 100m / 200m
low 50m / 100m
Theoretical range
Measuring period
10sek.
Alarm output potential-free relay contact
max. load 200 V DC, 0.5 A, max. switching power 10 W
operating lag after alarm 5 sec.
Alarm response time 50-300ms, adjustable at potentiometer
Armed/disarmed
input (receiver)
electrical input, towards COM (reference conductor I/O)
armed 0V-1.5 V/disarmed 3.5 V-Ub
go test input
(transmitter)
electrical input, towards COM
go test off 0V-1.5 V/go test on 3.5 V-Ub
first alarm memory
(receiver)
opto conductor output, open-collector towards COM
max. load 30 V DC, 50mA
Disqualification
(receiver)
opto conductor output, open-collector towards COM
max. load 30V DC, 50mA
Technical alarm opto conductor output, open-collector towards COM
max. load 30V DC, 50mA
operating lag 2 sec.
Sync (transmitter) electrical in-/output (bi-directional) towards Sync-COM
Sabotage contact potential-free switching contact
max. load 100 V DC, 0.2 A
Infrared beam wave length 940 nm
IR-impulse length 25 µs
pulse pause relation 1:200
keying ratio 2.5°
Alignment angle
horizontal ± 90°
vertical ± 15°
Operating temperature -5°C - +70°C
-30° C - +70° C, with heating elements
air humidity
98%
Housing
Dimensions LxHxD (400x96x95) mm LxHxD (345x96x75) mm
Protection class IP54 IP44, w/pillar
Weight
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech DIGITALK 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech DIGITALK 2000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info