Manual Aritech ATS7310 (page 3 of 24) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian)

702289

Zoom out

Zoom in

1/24

Mounting the unit

Figures 1 to 4 legend

Item Description

1. Screws

2. Flat cable

3. Extension pillars with the plastic rings on existing pillars

4. Screws on clips

5. Screws on extension pillars

Mounting the ATS7310 into ATS4000 or ATS1000A-SM control

panels

See Figure 1 for ATS4000, and Figure 3 for ATS1000A-SM.

1. Remove the screws (item 1) and lift off the control panel PCB.

2. Place the extension pillars with the plastic rings on top of the

existing pillars (item 3).

3. Place the clips in the square holes (item 4).

4. Mount the ATS7310 using the screws and extension pillars

(item 5).

5. Place the ATS control panel PCB back into its original position.

Mounting the ATS7310 into ATS2000, ATS3000, ATS4500, and

ATS1000A-MM control panels

See Figure 2 for ATS2000, ATS3000, and ATS4500. See Figure 4 for

ATS1000A-MM.

1. Place the clips in the square holes (item 4). Use metal pillars

when available.

2. Mount the ATS7310 using screws.

Connecting the GSM module

WARNING: Disconnect the AC mains plug from the AC mains wall

socket.

1. Remove the battery wires that run from the battery to the

control panel.

2. Add the blue tap connectors to the red and blue (or black)

battery leads.

3. Connect the additional wires, which will be clamped to the

GSM module.

4. Before clamping ensure that the battery leads will reach the

GMS module as well as the battery.

5. Connect the red wire to CON1+ and the battery.

6. Connect the blue (or black) wire to CON1− and the battery.

7. Connect the flat cable (item 2 in Figures 1 to 4) between the

control panel (MI connector) and the ATS7310 (connector

CON2 or COM3).

8. Connect the antenna to the GSM module.

9. Insert the SIM module into the SIM socket (SIM).

10. Apply power to the control panel and to the GSM module.

11. Check the field strength (RSSI LED). When required, move the

antenna in order to get the best signal.

Description of the ATS7310

Figure 5 legend

Item Description Function

1, 2. CON2, CON3 MI bus, system connector. Connects to the ATS

panel.

3. DIP switch See Table 1 below.

4. CON5 GSM Update.

5. LEDs Status LEDs.

6. SIME LED SIM Status LED.

7. CON4 Diagnostics / update.

8. CON6 Diagnostics.

9. CON1+ Battery + connection. See picture on PCB next to

CON1.

CON1 Not connected.

CON1− Battery − connection.

10. ANTENNA SMA antenna connector.

11. SIM SIM socket. Holds GSM SIM card.

DIP switch

The DIP switch provides the functionality described in Table 1

below.

Table 1: DIP switch description

No. Name Function Default value

1. MI_0 MI address selection Off

2. MI_1 MI address selection Off

3. BOOT Firmware update mode Off

4. HiLo GSM update mode Off

5. Test Factory test mode Off

LEDs

In the following LED descriptions, a flash is defined as 250 ms on

and 250 ms off. Groups of flashes are separated by 1 s off.

MI_ST

The MI_ST LED (green) displays the status of the communication

interface to the panel.

Table 2: MI_ST LED status

Duty cycle Rate (±10%) Description

100% — Power on (in case none of the cases below

are valid)

0% — No power or power failure

25% 1 s Initialization OK, waiting for communication

50% 1 s Everything OK, communication running

75% 500 ms Hardware failure

50% 250 ms Failure in communication, waiting for

reinitialization

CALL

The CALL LED (red) indicates status of the audio information

transmitted to the central station.

P/N 146376999-1 • REV 1.0 • ISS 03AUG09 3 of 24

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS7310 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 1,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aritech ATS7310 Manual

Product: