702264
8
Zoom out
Zoom in
Previous page
1/10
Next page
Informacje kontaktowe
Informacje kontaktowe można znaleźć na naszej witrynie:
www.gesecurity.eu.
PT: Instruções de Instalação
Montagem da unidade
A unidade ATS626 deve ser colocada na placa principal utilizando
os suportes fornecidos.
Ligações
CON1: Ligação para o conector plug-on do painel de controlo ATS,
por exemplo ATS1000A.
CON3: Estes terminais oferecem 7 outputs do tipo ‘open collector’
de 50 mA (nº. 1 — 7) e um output de alta corrente (nº.8) de 1 A com
‘pull up’ interno. Estes outputs encontram-se em terminais de
aperto juntamente com os terminais de +12 VDC e 0 V (GND).
O output de alta corrente pode ser utilizado tipicamente como
uma saída de sirene extra ou para outro dispositivo similar com
um comportamento de potência temporário.
Nota: Por favor tenha em consideração o consumo da output de
alta corrente, quando efectuar os cálculos da capacidade da
bateria de backup do sistema.
Este terminal pode também ser utilizado para ligar o ATS1810.
CON5: 8 x 50 mA open collector outputs (9 — 16).
CON6: Não utilizado.
Tabela 1: Ligação de Output - Direct open collector outputs
Nº CON3 CON5
1 +12 Volts +12 Volts
2 Output 1 Output 9
3 Output 2 Output 10
4 Output 3 Output 11
5 Output 4 Output 12
6 Output 5 Output 13
7 Output 6 Output 14
8 Output 7 Output 15
9 Output 8 (HC) Output 16
10 0 Volts 0 Volts
Especificações técnicas
Tensão de alimentação
Nominal
10.5 — 13.8 VDC
12 VDC
Consumo (standby) 50 mA
Corrente de ‘output Open collector’ (cada) 50 mA
Output de alta corrente (HC) 1 A
Dimensões (CxA) 90 x 40 mm
Temperatura de operação
Certificação IMQ
0 to +50°C
+5 to 40°C
Humidade 95%, sem condensação
Certificação e conformidade
Certificação
Directivas da
União Europeia
1999/5/EC (R&TTE directive): Onde , GE Security declara
que este dispositivo se encontra de acordo com os
requisitos essenciais e outras provisões relevantes da
directiva 1999/5/EC.
2002/96/EC (WEEE): Produtos marcados com este
símbolo não podem ser eliminados como resíduos
urbanos indiferenciados na União Europeia. Para
proceder à reciclagem adequada, devolva este
produto ao seu fornecedor local na compra de novo
equipamento equivalente, ou entregue-o nos pontos
de recolha designados para o efeito. Para mais
informações, ver www.recyclethis.info.
Informação de contacto
Para informações de contacto consulte o nosso site:
www.gesecurity.eu.
SV: Installationsanvisning
Montera enheten
ATS626 måste monteras på centralkortet, eller DGP, med hjälp av
de medföljande distanserna.
Anslutningar
CON1: Anslutning till plug-on kontakt, på ATS-centralkort, till
exempel, ATS1000A.
CON3: Denna anslutning ger 7 x 50 mA open collector utgångar
(nr. 1 — 7) och 1 1A open collector utgång (nr. 8). Dessa utgångar
finns på en skruvplint tillsammans med +12 VDC och 0 V (GND).
Högströmsutgången kan användas till en extra sirén eller andra
enheter som kräver högre belastning.
Notera: Observera att strömförbrukningen för ATS626
högströmsutgång måste tas I beaktande vid kalkulering av hela
systemets reservdrift.
Denna anslutning kan även användas för ATS1810.
CON5: 8 x 50 mA open collector utgångar (9 — 16).
CON6: Används inte.
Tabell 1: Utgångasplacering - Open collector utgångar
Nr. CON3 CON5
1 +12 Volts +12 Volts
2 Utgång 1 Utgång 9
3 Utgång 2 Utgång 10
4 Utgång 3 Utgång 11
5 Utgång 4 Utgång 12
6 Utgång 5 Utgång 13
7 Utgång 6 Utgång 14
8 Utgång 7 Utgång 15
9 Utgång 8 (HS) Utgång 16
10 0 Volts 0 Volts
8 of 10 P/N 1068835 • REV 1.0 • ISS 31JUL09
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS626 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS626 in the language / languages: All languages as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info