702263
2
Zoom out
Zoom in
Previous page
1/8
Next page
Specifications
Supply voltage 10.5 to 13.8 V
Current consumption 10 mA
EOL resistor See Advisor Advanced Installation Guide
Dimensions (H x W)
(size B board)
80 x 35 mm
Operating temperature
IMQ tested
0 to 50°C
5 to 40°C
Humidity 95% RH, noncondensing
Regulatory information
Certification
European Union
directives
1999/5/EC (R&TTE directive): Hereby, GE Security
declares that this device is in compliance with the
essential requirements and other relevant provisions
of Directive 1999/5/EC.
2002/96/EC (WEEE directive): Products marked with
this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more
information see: www.recyclethis.info.
Contact information
For contact information see our Web site: www.gesecurity.eu.
DA: Installations vejledning
Montering af enheden
ATS608 enheden monteres på centralprintet, ved hjælp af de
medfølgende selv-låsende stag.
Tilslutninger
Figure 1 punkter
Punkt Beskrivelse
1. CON1: Konnektor for plug-on tilslutning til Advisor Advanced
central, for eksempel ATS1000A
2. Normal lukket sabotage kontakt (NC)
3. Indgang: konnektor for 8 zoner
4. Normal lukket alarm kontakt (NC)
Advarsel: Advisor Advanced centralen skal være slukket når
udvidelse modulet tilsluttes.
Zone nummering
En standard ATS608 8-zoners DGP kan have op til 8 zoner tilsluttet.
Det er ikke muligt at udvide antallet af zoner.
Antallet af zoner kan øges til maksimalt 32 zoner, ved at tilslutte
DGP’er til ATS LAN. Op til 16 zoner kan tildelles til hver DGP
address. Se Advisor Advanced programmerings manual for
ydligere detaljer.
Tekniske specifikationer
Forsyningsspænding 10.5 — 13.8 V
Strønforbrug 10 mA
EOL modstand Se Advisor Advanced installation vejledning
Mål (H x B) (størelse B print) 80 x 35 mm
Driftstemperatur
IMQ testet
0 to +50°C
+5 to 40°C
Fugtighed 95%, ingen kondensdannelse
Certificering og overholdelse
Certificering
EU-direktiver 1999/5/EC (R&TTE direktivet): GE Security erklærer
herved at dette produkt overholder de væsentlige krav
og andet relevant i detektivet 1999/5/EC.
2002/96/EC (WEEE): Bortskaffelse af elektrisk og
elektronisk udstyr har til formål at minimere den
indvirkning, som affald af elektrisk og elektronisk
udstyr har på miljøet og mennesker. I henhold til
direktivet må elektrisk udstyr, der er mærket med dette
symbol, ikke bortskaffes sammen med almindeligt
husholdningsaffald i Europa. Europæiske brugere af
elektrisk udstyr skal aflevere kasserede produkter til
genbrug. Yderligere oplysninger findes på webstedet
www.recyclethis.info.
Kontakt information
Kontakt information kan findes på Web site: www.gesecurity.eu.
DE: Installationsanleitung
Installation der Einheit
Die ATS608 Erweiterung muß durch Verwendung der
selbstaretierenden Abstandsbolzen auf der Zentralenplatine
installiert werden.
Verbindungen
Abbildung 1 Positionen
Position Beschreibung
1. CON1: Steckleiste für Verbindungsbuchse von Advisor
Advanced-Zentrale, zum Beispiel ATS1000A
2. Normal geschlossener Sabotagekontakt
3. Eingänge: Anschlussklemmen für 8 MG mit gemeinsamer
COM-Rückleitung
4. Normal geschlossener Alarmkontakt
Warnung: Advisor Advanced-Zentrale müssen während der
Installation der Erweiterung spannungslos geschaltet warden.
MG-Nummerierung
Eine Standard ATS608 8-MG Erweiterung (AME) ermöglicht die
Anschaltung von bis zu 8 MG. Für die Anschaltung weiterer MG
steht keine Option zur Verfügung.
Zusätzliche MG-Eingänge können bis zu einer Anzahl von max.
32 MG nur durch Verwendung von ATS LAN AME’s realisiert
2 of 8 P/N 1068834 • REV 1.0 • ISS 01AUG09
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS608 in the language / languages: All languages as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info