Manual Ariston TI SHAPE PLUS (page 13 of 60) (English, German, French, Italian, Polish, Portuguese, Spanish)

475055

Zoom out

Zoom in

1/60

For this very reason, we recommend you connect this drain, leaving it always open, to

a drain pipe installed inclined continuously downwards and in a place without condensation.

Should the mains supply pressure be close to the maximum pressure value indicated

on the data plate, then a pressure reducing valve should be fitted as far away from the

appliance as possible. Should you decide to install the mixer assemblies (taps and

fittings or shower), make sure the piping is cleared of any impurities that could cause

damage.

Electrical connection

The appliance must be connected to the mains electricity supply by means of a differential

bipolar thermo-magnetic switch (30 mA) complying with the CEI-EN regulations in force

(contact break of at least 3 mm, even better if they are provided with fuses), or by means

of a plug.

Whenever the appliance needs to be disconnected from the mains electricity supply,

then use this switch to do so. The appliance is equipped with a H05VV-F cable with a

3x1,5mm

cross-section, 8.5mm in diameter. The yellow-green earth wire must be

slightly longer than the phase wires. Before putting the appliance into operation, check

that the mains voltage conforms to the value on the appliance's data plate.

Putting into operation and testing

Before connecting the appliance to the electricity supply, fill the boiler up with water

from the mains supply. To do this, allow water to enter the appliance by opening the

main tap of your home system while at the same time turning a hot water tap on until

water comes out from it.

Check to see whether there are any water leaks from the flange (F fig.11). If there are

any, then tighten in moderation the corresponding fixing nuts (C fig. 10). Turn the

appliance on by pressing the switch.

Maintenance instructions

A qualified professional must perform all maintenance and servicing operations.

Before calling on our Technical Assistance for a suspected failure, make sure that the

malfunction is not due to other causes such as, for example, the temporary lack of water

or of electricity.

The replacement of any spare parts

Disconnect the appliance from the mains electricity supply. Remove the cap to have

access to the electrical parts (fig. 8).

To act on the thermostat and power PCB (fig. 9), disconnect them from the supply cable

and remove them from their housing.

For any servicing of the heating element and anode, first of all empty the appliance of

its contents as follows:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariston TI SHAPE PLUS in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariston TI SHAPE PLUS Manual

Product: