558253

Ariete 4160 Manual

11
Zoom out
Zoom in
Previous page
1/55
Next page
• Fill up the tank with water before starting up the appliance. Be sure to unplug the appliance before pouring water into
the tank.
• Turn on the appliance only when it is in working position.
• Never leave the appliance unattended when it is connected to the power supply.
• When you have to leave for even a short period of time, turn off the appliance and always unplug the electric power cord.
• Store indoors in a cool, dry area.
• 

A - Steam dispensing button
B - Handle
C - Swivel cord storage hook
D - Handle release button
E - “ON” indicator light
F - Tank release lever
G - Motor body
H - Water tank
I - Filter
J - Fixed cord storage hook
K - Steam head
L - Washable cloth
M - Power supply cable
N - Accessory for carpet cleaning
O - Washable cloth velcro couplings
P - Steam discharge nozzle

Proceed as follows after removing the appliance from the box:
Assemble the motor body to the steam head (Fig. 2). Tighten the screw supplied to lock the components (Fig. 3).

Check the tightening of the screw from time to time.
Press the handle release button (D). Lift the handle until it is aligned with the motor body (Fig. 4-5).

Totally unwind the power cord. To make the operation easier, turn the hook (C) downwards.
Remove the tank. Lift the tank release lever upwards as shown by the arrow (Fig. 6). At the same time tilt and remove the
tank. Turn the tank upside-down. Remove the cap (Fig. 7). Fill the tank up to the MAX level directly beneath the tap with cool
tap water (Fig. 8). Screw the cap back on, but not with excessive force.

NEVER ll the tank beyond the MAX level. If the tap water is particularly hard (higher than 20°f), use a mixture of
50% tap water and 50% demineralised water.
Put the tank back in, paying attention to match the tank valve with the pin in the appliance seat (Fig. 9). Press the tank all
the way down until it is completely inserted and check that it is correctly installed. Place the cloth under the steam head
(Fig. 10). Set the cloth above the velcro couplings.

Make sure that the tank has been adequately lled to prevent dry operation.
Before using the appliance be sure that the objects and surfaces to treat are resistant or compatible with the high
steam temperature. It is recommended to consult the manufacturer’s instructions and perform a test on a concealed
part or a sample particularly on treated terracotta tiles and wooden surfaces.

If the appliance is left standing on the oor while it is in operation, you may notice a whitish ring. Do not be alarmed
because this can be removed with a decalcication agent or with some drops of vinegar.
Insert the plug into the socket, which must be earthed. The indicator lamp (E) will turn on, indicating that the appliance is on
11

… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 4160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 4160 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info