Manual Argus QC-3195B (page 18 of 20) (English)

477706

Zoom out

Zoom in

1/20

Battery level is low - When the battery indicator does

not show a fully charged battery, the voltage is too low

for the ﬂash to work. Please change batteries.

Image is blurred / out of focus

Subject is out of focal range. Ensure that there is at least

1.5m ( 5ft ) between the camera lens and subject.

Camera moved during the shot- Hold the camera steady

while taking the picture. When ﬂash is on, hold the

camera steady until ﬂash has ﬁred twice( The ﬁrst ﬂash

is to reduce red-eye and to detect the brightness of the

target.)

Computer does not recognize camera for Windows

98SE,

The camera driver has to be installed before picture

download. In picture preview mode, ensure that USB

mode is set to MSDC before connecting the camera to

the computer. For Windows 2000/ ME /XP, the camera

is recognized as a plug -&-playable, removable ﬂash

disk without driver installation under MSDC mode.

It is recommended that you disconnect your digital

camera from your computer after use.

Subject in recorded image is too dark

Insufﬁcient light for shooting Set the ﬂash On, or adjust

the exposure compensation to a positive (+) setting.

Flickering on lcd screen or recorded image

Incorrect frequency setting Check the correct anti-ﬂicker

frequency ( 50Hz or 60Hz ) under ﬂuorescent light

setting.

Picture download problem

Flash disk does not display images recorded. The

camera will load two removable ﬂash drives on your

computer under MSDC mode. The ﬁrst drive is the

external SD or MMC cartridge and the second drive is

the recorded images saved in the built-in memory of the

camera. In cases when the removable ﬂash drive names

coincide with those already assigned by the computer

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Argus QC-3195B in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Argus QC-3195B Manual

Product: