477714
143
Zoom out
Zoom in
Previous page
1/146
Next page
ARGUS
A
RGUS 125 143
C) CAUSE-Messages – 1TR6 Protocol
Dec. Cause Description
01 Invalid call reference value Invalid call reference value
03 Bearer service not
implemented
The service is not available in the central office or at another
location in the network or the service has not been subscribed.
07 Call identity does not exist Unknown call identity
08 Call identity in use Call identity is already assigned to a “suspended“ connection.
10 No channel available No further B-channel is free on the subscriber’s access.
(only significant locally)
16 Requested facility not
implemented
The entered FAC-Code is unknown in this network.
17 Requested facility not
subscribed
The requested facility is not available, because the initiating or
the remote subscriber is not authorized.
32 Outgoing calls barred Outgoing calls are not possible due to the barring
33 User access busy If the sum of the number of free B-channels, the number of
occupied B-channels, the number of awarded B-channels and
the number of calls without B-channel assignment equals four,
new incoming calls will be cleared from the network. The calling
subscriber receives a DISC with the cause “user access busy“
(= 1. busy) and a busy signal.
34 Negative CUG comparison A connection is not possible due to a negative CUG (GBG)
comparison.
35 Non-existent CUG This CUG (GBG) does not exist
37 Communication link as SPV
not permitted
A connection is not possible, since for example, the RFNR-test
was negative
53 Destination not obtainable A connection cannot be made due to a wrong destination,
service or supplementary services.
56 Number changed Subscriber-B’s call number has changed.
57 Out of order The remote terminal is not ready.
58 No user responding No terminal has answered the incoming SETUP or the
subscriber call was disconnected, it is assumed that someone is
present (Time-out for ringing T3AA).
59 User busy Subscriber-B is busy
61 Incoming calls barred The Subscriber-B has blocked incoming calls or the requested
service is not supported by Subscriber-B.
62 Call rejected To Subscriber-A:
The requested connection is actively rejected by Subscriber-B
(by sending a DISC as answer to the incoming SETUP).
Another terminal is in the setup phase with the incoming call;
the call has already been accepted by another terminal on the
bus.
89 Network congestion Network congested, e.g., switching equipment congestion, no
conference set free,
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argus 125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argus 125 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info