642247
13
Zoom out
Zoom in
Previous page
1/15
Next page
www.argonaudio.com 13
O c t a v e 4 A
For “Auto Power Up” (APU) there are 3 different settings
you can choose from:
No APU
means you need to turn Argon Octave 4A On
manually (see above)
APU1 scanning all inputs
Argon Octave 4A will make a cycling process and
scan all five inputs for signal. The process takes
about 3 seconds for each cycle
While searching for an active input the Blue light
will flash in the display-eye.
When a signal is found, Argon Octave 4A will
automatically turn On and select the source.
If you have several sources connected to the
Argon Octave 4A it’s recommended to use this
setting.
APU2 detect only last selected source
Which also means that only the last played input
source can turn on the Argon Octave 4A. If you
have only one input connected its recommended
to use this setting.
Setting/changing the APU mode
Setting - No APU
Unplug the AC power cable from the back side of
Argon Octave 4A, and wait for 10 seconds to
proceed to the next step. (to discharge
completed)
Press and hold the volume/input knob while you
insert the AC power cable again.
When the display-eye on the front start to flash
yellow, release the knob.
Wait until the
display-eye stop flashing, APU is
now set to have no APU and Argon Octave 4A
will go into standby
Setting - APU1
Unplug the AC power cable from the back side of
Argon Octave 4A, and wait for 10 seconds to
proceed to the next step.
Press and hold the volume/input knob while you
insert the AC power cable again.
When the display-eye on the front start to flash
yellow, release the knob.
Press and release the knob again ONCE while
the yellow light is still flashing (press within five
seconds)
Wait until the
display-eye stop flashing, APU is
now set to cycling process and Argon Octave 4A
will go into standby
Setting APU2
Unplug the AC power cable from the back side of
Argon Octave 4A, and wait for 10 seconds to
proceed to the next step.
Press and hold the volume/input knob while you
insert the AC power cable again.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon Octave 4A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon Octave 4A in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon Octave 4A

Argon Octave 4A User Manual - German - 14 pages

Argon Octave 4A User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info