642216
9
Zoom out
Zoom in
Previous page
1/10
Next page
www.argonaudio.com 9
DA2 V2
Notice: If DA2V2 is connected with a Argon iNet6+ they have to be connected only by Optical digital out/in.
If iNet6+ is connected to DA2V2 via analogue RCA the volume function on the remote will not work properly
Power Management (Auto Stand-by)
According to the EC regulations implemented January 1
st
.
2013 Argon Audio DA2V2 will automatically go into auto
standby if it is without a music signal for 20 minutes.
This rule is applied by the EC in order to save power
consumption.
Basic Troubleshooting
If the LED does not light up, check...
that the AC power cord is firmly plugged into the rear panel
and wall outlet.
to make sure the amplifier rear panel power switch is ON.
that the amplifier is getting power from the wall outlet.
that the rear panel voltage match the operating voltage.
the fuse in the AC IN on the rear panel. If the fuse needs to
be replaced it is extremely important to replace only with
same fuse type and value.
If no sound output, check...
that the amplifier is turned on (blue LED illuminated)
to make sure the speakers are connected correctly
that the volume on the front panel is not all the way down.
the volume level on the iPod or other audio source.
If bass output is low, check...
speaker wire polarity (verify that wires are going to same
terminals on both speakers + to + and to -)
Using Optical cable… ensure that you have removed the
small plastic covers from the Optical cable connections
Specifications:
Type: Full class D, digital amplifier
Inputs: Digital USB2.0, 2 x Optical digital,
Analogue L/R RCA stereo input
Output: SUB-OUT, 1 set speaker output
Main voltage: 220-240V, 50/60Hz
Distortion: @4ohm 20-20Khz 0,3% @8ohm 20-20Khz 0,2%
Input sensitivity: 500mV (RCA) analogue
Frequency Response: (-1db @1Khz): 20Hz-20Khz
Output Power: 2X50W (RMS @4ohm)
Resolution: USB2.0 16bit/48Khz, Optical max.
16 bit/96Khz
Optical processing: Burr Brown 2704 processed via Sp/diff
and then D/A converted by AKM4388A
Notice: optical is not supported via Bluetooth to an Argon
BT2. Instead, use analogue input on DA2V2, if you intend to
connect an Argon Audio BT2 Bluetooth adaptor).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon DA2 v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon DA2 v2 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info