755640
5
Zoom out
Zoom in
Previous page
1/6
Next page
www.argonaudio.com
5
B T 3
2. PAIR (2). button.
This button is used to pair your:
a) Playback device (RX mode), such as Mobile Phone
b) Receive device (TX mode), such as Headphone.
a) Playback device (RX mode), pairing a playback device such as a mobile
phone - set TX/RX (3) switch to RX mode.
Go to Bluetooth setting on your Mobile phone, make sure Bluetooth is
activated and select “pair new device”
Press and hold PAIR (2) button on BT3 for 3 sec until the blue LED light on
the front of BT3 starts blinking.
BT3 will show up Make sure Bluetooth is activated on your Mobile Phone
and make sure the BT3 is in ON (steady Blue LED light on the front).
Press and hold the PAIR (2) button for 3 seconds. The Blue LED light on the
front will start blinking.
The BT3 will show up on your Mobile phone. Press on “BT3” on the Mobile
Phone display and it will pair with BT3.
In the process your phone will “ask” to share “contacts etc” choose “yes”.
Your Mobile phone and BT3 are now paired and connected.
In the BT setting screen on your Mobile Phone press the setting button of
the paired BT3 (look like a “wheel) if your Mobile phone supports HD Audio
it will show in the settings. Activate HD Audio.
b) Receive device (TX mode), pairing a receive device such as a BT
Headphone - set TX/RX (3) switch to TX mode.
Connect BT3 to the source you want to transmit (ex. TV) using optical cable
or analogue cable.
o Optical cable connect to OPTICAL IN (TX) (5)
o Analogue cable connect to AUDIO IN (TX) (4)
Switch button on back of BT3 to TX (3)
Press and hold Pair button for 3 sec until LED light on the front start flashing
blue.
Turn on your receiving device (BT headphone) and put device in pairing
mode.
(BT3 will automatically connect to the closest BT device (the device with the
strongest signal in your surrounding). So make sure to place the device you
want to connect as close as possible to BT3)
When paired and connected with your headphone it will start playback.
To un-pair a device press un-pair button for 3 sec and BT3 will automatically
try to connect with the next device that is ready for pairing.
To avoid paring with a device you don’t want to pair with turn the unwanted
device off.
3. TX/RX (3). switch, to change between:
Playback mode (TX) like Mobile Phone, Lap Top
Receive mode (RX) like a BT Headphone.
D/A converter function mode set switch to TX (3)
5


Need help? Post your question in this forum.

Forumrules
1

Forum

argon-bt3

Reset search

  • I have a pairing problems with Argon BT3 and JBL ClubOne. My phone finds both but they do not pair together. I tried to pair both, TX and RX mode but no pairing. What can be wrong? Submitted on 7-1-2022 at 16:34

    Reply Report abuse
  • I am trying to get sound out of my stereo system via phone plug. I have a problem pairing with JBL ClubOne BT headphones. My phone finds both, Argon BT3 and JBL but they do not pair together. What can be wrong? I tried to pair with TX mode and RX mode, but no difference except Argon finds some else BT device. Submitted on 7-1-2022 at 16:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon BT3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon BT3 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info