755654
2
Zoom out
Zoom in
Previous page
1/4
Next page
w w w . a r g o n a u d i o . c o m 2
A LT O c e n t e r
Owner ’s manual
Dear Customer,
Quality has always been our driving force and founding
Argon Audio is a natural extension of this philosophy.
We have 20 years’ experience in creating and specifying
high quality products, manufacturing them and selling
them on to end users with Value-for-Money as the primary
aim. And Argon Audio is a brand fully compliant with these
values.
Design, features and quality standards are all specified in
Denmark and manufacturing takes place in the Far East,
where quality vendors are highly competitive - and as a
result supply outstanding Value-for-Money products
– to the delight of both ourselves and our customers!
Introduction
Thank you for choosing Argon Audio loudspeakers, we
hope It will bring you many years of enjoyment.
Please read this manual fully before unpacking and
installing the product.
Carton contents
We have during production and packing carefully checked
and inspected this loudspeaker.
After unpacking please check for any damage from
transport.
We recommend that you keep the original carton box and
packing material for any future shipping.
Loudspeaker installation
The speaker is best used with the tweeters approximately
at ear level when seated.
Loudspeaker positioning
Variations in placement of your loudspeakers can produce
dramatic differences in the way music sounds. No listening
rooms are the same and therefore we encourage you to
spend some time experimenting with which placements
work best in your listening room. Trust your ears and be
willing to experiment freely. You can start with our basic
recommendations.
To begin with, the centre loudspeaker should be positioned
horizontal directly under your TV.
Home Theatre Systems
Argon ALTO Center can be used as centre channel in a
surround sound home theatre system.
Positioning the centre loudspeaker close to your TV will
create the best sound image in scale with the visual image.
If Argon ALTO Center are to be used for reproducing the
surround channels in a multi channel home theatre system,
we suggest you place them as illustrated in Figures 2 to 5
depending on the number of channels.
Connecting your loudspeakers
We recommend that you read the manual of your amplifier
or av-receiver carefully before connecting your loudspeaker.
Please switch off all equipment when connecting your
loudspeaker. The binding posts on the terminal accepts wire
up to Ø 4mm or cables with banana plugs.
Make sure that positive terminal binding posts on the
speaker (marked + and colored red) are connected to the
positive output terminal binding posts on the amplifier and
that the negative terminals on the speaker (marked – and
colored black) are connected to the negative output terminal
on the amplifier. See fig 5.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon Alto Center at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon Alto Center in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon Alto Center

Argon Alto Center User Manual - German - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info