755645
3
Zoom out
Zoom in
Previous page
1/4
Next page
w w w . a r g o n a u d i o . c o m
ALTO A 4 / A 5
Quick start
Start up
1. Connect the Alto Active Speaker with the Alto Passive Speaker, using
normal speaker cable. (remember to connect +to+ and to-)
2. Connect the Power cord into an electric outlet and into the back of the Alto
Active Speaker. The LED light on the loudspeaker will light ORANGE.
3. Your speaker is automatically ready for Pair and Connect with Bluetooth
(BT), if you intend to use this function - Activate BT on your playback device
(mobile phone etc) and Scan for Devices. Your speaker will show up as
“ARGON ALTO”. Press “pair” and you are connected. The LED light on the
speaker will change to solid BLUE. Start playback from you playback device
(mobile phone etc) there will be both a solid BLUE and a LIGHT BLUE LED,
indicating BT playback.
a. Notice; when you restart playback from BT, it will take 5-8 sec. before
sound will be heard from the speaker.
4. Besides BT, Argon Alto have four more input: Optical1, Optical2, AUX and
Phono. Use the included remote control to select your wished input.
5. When connecting a turntable to the RCA Phono input on the Alto speaker,
remember to also connect the ground wire from the turntable, to the metal
GND screw on the back side, below to the left from the Phone RCA
connectors of the Alto speaker.
6. If you have an Active Subwoofer, connect it to the Alto Speaker SUB
OUTPUT, using a RCA cable and then connect the cable to Your
Subwoofer.
Basic Operating
1. You can adjust the Master volume on the back of the Alto speaker.
a. It’s recommended to set the Master volume at a rather high level.
b. Then control the daily volume level using Your Source player (Tablet,
Laptop, Mobile Phone etc), or the included remote.
2. Remote function from Samsung and Sony TV remotes. Argon Alto support
most Samsung and Sony remote functions for “Volume +/-“ and “Mute”. If
you use the Argon Alto with a Samsung or Sony TV it allows you to have
only one remote control (the TV remote) to control basic and useful
functions.
Tips
Most Samsung and Sony TV remotes can control “volume” and “mute” on
the Argon Alto.
We recommend a running-in time of your Alto Speakers of approximately
15-20 hours at normal listening level before you decide on the final
positioning of the Speakers. During the running-in time the drive units will
settle in and perform as intended.
For optimal sound performance, the best listening position is on ear level
with the speakers placed not too far from a wall.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon Alto A4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon Alto A4 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon Alto A4

Argon Alto A4 User Manual - German - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info