642238
1
Zoom out
Zoom in
Previous page
1/2
Next page
www.argonaudio.com 1
Quick start
63xx series Quick start Guide
(Argon Audio 6340, 6350, 6344C, 6344FS and 6355FS)
We care about the Environment
By refraining from inserting a full printed manual with our
Argon Audio products we save more than 20 tons of paper
each year. You can find full product information for this
product on; www.argonaudio.com
Speaker positioning
The Speakers are best used with the tweeters
approximately at ear level when seated. Variations in
placement of your Speakers can produce dramatic
differences in the way music sounds. No listening rooms are
the same and therefore we encourage you to spend some
time experimenting with which placements work best in your
listening room. Trust your ears and be willing to experiment
freely. You can start with our basic recommendations.
Please try to ensure that the rooms surroundings of each
Speaker left and right are similar in acoustic character.
For example, if one Speaker is placed on bare walls while
the other is placed close to soft furniture’s and curtains,
both the overall sound quality and the stereo image are
likely to be compromised. Because bookshelves are usually
located close to the wall, placement on bookshelves will
often provide a richer, more full-bodied sound. In other
words; you will get more Bass. On the other hand, if you
place the Speakers free-standing You will get less Bass but
a clearer sound. To begin with, the Speakers should be
positioned between 1.5m and 3m apart at two corners of an
equilateral triangle completed by the listening area at the
third corner. See fig. 1
Home Theatre Systems
Argon Audio 63xx series speakers can be used as front
channels in a surround sound home theatre system.
Positioning the front Speakers within approximately 1metre
of the sides of your TV will create the best sound image in
scale with the visual image. The Speakers’ height should
ideally be between the centre and top of the screen. If the
Speakers are to be used for reproducing the surround
channels in a multi channel home theatre system, we
suggest you place them as illustrated in Figures 2 to 4
depending on the number of channels.
Connecting your loudspeakers
We recommend that you read the manual of your amplifier
or AV-receiver carefully before connecting your Speakers.
Please switch off all equipment when connecting your
Speakers. The binding posts on the terminal accepts wire
up to Ø 4mm or cables with banana plugs. Make sure that
positive terminal binding posts on the Speaker (marked +
and colored red) are connected to the positive output
terminal binding posts on the amplifier and that the negative
terminals on the Speaker (marked and colored black) are
connected to the negative output terminal on the amplifier.
See fig 5.
You are now ready to enjoy your Argon Audio Speakers…!
Running-in period
We recommend a running-in time of your Argon Audio
Speakers of approximately 15-20 hours at normal listening
level before you decide on the final positioning of the
Speakers. During the running-in time the drive units will
settle in and perform as intended.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon 6344FS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon 6344FS in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info