642236
10
Zoom out
Zoom in
Previous page
1/11
Next page
www.argonaudio.com 10
6340A
What not to do when connecting a Source input
to your Argon 6340A
Do not use a combined RCA and Mine-Jack (3,5mm) cable!
Often you will see a cable that has mini-jack at one end and
two RCA plugs at the other end. The cable will work but the
input sensitivity of mini-jack and RCA are quite different.
This will result in the Argon 6340A playing too low volume.
Basic Troubleshooting
If the LED does not light up, check...
that the AC power cord is firmly plugged into the rear panel
and wall outlet.
to make sure the speaker rear panel power switch is ON.
that the speaker is getting power from the wall outlet.
that the rear panel voltage match to the operating voltage.
the fuse in the AC IN on the rear panel. If the fuse needs to
be replaced it is extremely important to replace only with
same fuse type and value.
If no sound output, check...
that the speaker is turned on (blue LED illuminated)
to make sure the R speaker is connected correctly to the L.
that the volume on the speaker back panel is not all the
way down.
the volume level on your iPod or other audio source is not at
level 0.
that there is music playing on your iPod or other audio
source.
If bass output is low, check...
speaker wire polarity (verify that wires are going to same
terminals on both speakers)
that the speaker placement is not too close to a wall or
other obstruction.
that the bass ports on the rear panels are not blocked by a
rodent or jelly sandwich.
If no output from right speaker, check...
that the speaker wire is properly connected from the left to
right.
Check by removing the speaker wire from both terminals on
each speaker and reconnecting.
Power Management (Auto Stand-by)
According to the EC regulations implemented January 1
st
.
2013 Argon Audio6340A will automatically go into auto
standby if they are without a music signal for 20 minutes.
This rule is applied by the EC in order to save power
consumption.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon 6340A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon 6340A in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info