724697
5
Zoom out
Zoom in
Previous page
1/7
Next page
12
V 01/18
ON/OFF BUTTON
In power on state, press this button, the unit turns off and enters standby mode.
In power off state, press this button and it turns on.
SPEED BUTTON
In power state, press the SPEED button to switch among low, medium and high level.
COOL/HUMIDITY BUTTON
Press this button to turn on or turn off the "Cooler/Humidifier" mode: the LED lights up.
MODE BUTTON
In power on state, press this button to switch the working mode among Normal, Natural and Sleep.
- Normal mode: the unit runs at a constant speed setting;
- Natural mode: the unit runs at changing wind speed as set by the factory. In this mode the ventilation can be
changed and the correspondent Led will light on the display.
- Sleep mode: the unit runs at changing wind speed as set by the factory. In this mode the ventilation can be changed
and the correspondent Led will light on the display.
- Smart mode: The specific functions of smart mode are as follows: When the ambient temperature is below 25°C, the
unit runs at low speed wind; when the ambient temperature is 25-29°C, the unit runs at medium speed wind; when
the ambient temperature is above 29°C, the unit runs at high speed wind.
SWING BUTTON
In power state, press this button to switch on/off the rotary blades; the corresponding indicator displays its function. The
blades rotate 360° clockwise or counter-clockwise.
ION BUTTON
Push this button to turn on and off the ION function. The correspondent LED will turn on.
TIMER BUTTON
After turning on, the timer indicator is turned off by default and the digital tube displays ambient temperature; when the
button is first pressed, the timer sets to 1 hour; the time increases by 1 hour when the button is pressed every time, and
the timer can be set up to 8 hours; if the button is pressed again, the digital tube displays the room temperature, and the
timer turns off; press the button again to repeat the cycle;
HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)
Open the battery cover on the back of the remote control (press and pull the cover).
Place the battery inside the cover, making sure the polarity is correct.
Slot the cover back into position on the remote control.
Use Lithium/Manganese button cells, model no. CR2025 -3 V, compliant with Battery
Directive no. 2006/66/EC (supplied with the remote control).
REMOTE CONTROL
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Polifemo Ion at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Polifemo Ion in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Polifemo Ion

Argo Polifemo Ion User Manual - German - 8 pages

Argo Polifemo Ion User Manual - French - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info