665671
4
Zoom out
Zoom in
Previous page
1/5
Next page
9
V 03/17
DESCRIPTION OF PARTS
1. Nut
2. Front guard
3. Blade
4. Screw
5. Rear guard
6. Power switch
7. Oscillation knob
8. Motor
9. Power cord
10. Tube
11. Joint screw
12. Base additional part
13. Base
ASSEMBLY INSTRUCTIONS
1. After removing everything from the carton, locate the motor unit and separate the front guard and back guard if they are
connected.
2. Take the rear guard, mount it in the two holes of the motor unit, and tighten it with only one locking screw provided; the
rear guard will only fit one way: with the handle facing up.
3. Take the fan blades and align the centre of the blades over the metal spindle protruding from the motor unit. The intent
on the metal spindle aligns with the locking screw on the fan blades. After the blade has been put on, tighten the
locking screw on the fan blades and ensure that the blades is secured to the motor unit.
4. Align the front guard to the rear guard and lock into place with 3 locking tabs that are located on the guard. Locate the
security nut and bolt and secure the front and rear guards together with security nut and bolt. This is a safety precaution
to prevent the accidental dismantling of the fan.
5. Locate the pedestal base of the fan. Insert the base of the stand into the pedestal base, then fasten the base and the
pole with the screws provided.
6. Undo the thumbscrew at the top of the stand(item 10) and align the motor unit complete with guards before fastening.
BASE AND TUBE INSTRUCTIONS
The appliance does not need to be installed.
Take the base and tube parts from the packing box and loose the 4 joint screws. Fix the tube on the base plate by the joint
screws. Position the unit on a flat, stable surface.
HOW TO USE THE APPLIANCE
Connect the power cord to a suitable power socket (220-240 V~).
This fan can be used both as 3 fan speed options: low, medium and high.
This fan has a swivel action head giving a smooth oscillation action along with low noise levels, low electrical usage,
reliability with safety, while still providing efficient air flow.
The power switch is incorporated in the speed control switch on the top of the fan.
0- The Fan is switched Off
1- The Fan operates at the lowest speed
2- The Fan operates at the medium speed
3- The Fan operates at the highest speed
The fan can operate in oscillation or static mode. To make the fan head oscillate, push down the Oscillation Knob.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Palladium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Palladium in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Palladium

Argo Palladium User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info