665670
4
Zoom out
Zoom in
Previous page
1/5
Next page
9
V 03/17
DESCRIPTION OF PARTS
ASSEMBLY INSTRUCTIONS
1. After removing everything from the carton, locate the motor unit and separate the front guard and back guard if they are
connected.
2. Locate the rear guard and align with the motor unit; the safety grille will only fit one way: with the handle facing up.
Insert 4 locking screws and tighten to secure the rear guard to the motor unit.
3. Screw on plastic nut tightly to attach the guard.
4. Loosen the set screw on the blade, slide the blade onto the shaft of the motor, tighten the set screw onto the flat of the
shaft to secure the blade.
5. Assemble the front guard to the rear guard. Tighten the connecting screw and nut, secure the retaining clips.
6. Remove the set screw on the pole , offer up and align the base with the hole on the pole insert the base set screw and
tighten.
BASE AND TUBE INSTRUCTIONS
The appliance does not need to be installed.
Fix the tube on the base plate by the joint screws.
Position the unit on a table.
HOW TO USE THE APPLIANCE
Connect the power cord to a suitable power socket (220-240 V~).
This fan can be used both as 3 fan speed options: low, medium and high.
This fan has a swivel action head giving a smooth oscillation action along with low noise levels, low electrical usage,
reliability with safety, while still providing efficient air flow.
The ON/OFF switch is incorporated in the rotary switch in the motor housing, where it’s possible to select the fan speed:
0- The Fan is switched Off
1- The Fan operates at the lowest speed
2- The Fan operates at the medium speed
3- The Fan operates at the highest speed
The fan can operate in oscillation or static mode. To make the fan head oscillate, push down the Oscillation Knob.
To stop the fan head from oscillating, pull-up the Oscillation Knob.
A Thermal protector device was mounted in the motor. When overheats due to various reasons, the temperature of the
motor reaches the fusing point, it will cut off automatically, make the fan safe efficiently. When the protector is fused, the
fan should be eliminated trouble and replace a new thermal protector before the fan is used again.
1. Oscillation knob
2. Switch knob
3. Motor
4. Power cord
5. Adjusting knob
6. Base set screw
7. Base
8. Rear guard
9. Set screw
10. Blade
11. Nut
12. Screw
13. Front guard
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Iridium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Iridium in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Iridium

Argo Iridium User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info