665483
3
Zoom out
Zoom in
Previous page
1/29
Next page
3
EG
IMPORTANT!
Please read before installation
This system meets strict safety and operating standards.
For the installer or service person, it is important to install or service the system so that it operates safely and efficiently.
Recommendations
The personnel responsible for receiving the unit must conduct a visual inspection in order to identify all damage to which
the unit may have been subjected during transport: refrigerating circuit, electrical cabinet, chassis and cabinet.
During installation, troubleshooting and maintenance operations, never use the pipes as a step: under the stress, the
pipes may break and the refrigerant may cause serious burns.
For safe installation and trouble-free operation, you must:
Carefully read this instruction booklet before beginning.
Follow each installation or repair step exactly as shown.
Observe all local, state and national electrical (and safety) codes.
Pay close attention to all warning and caution notices given in this manual.
Supply the unit with a dedicated electrical line.
Make install the unit by qualified personnel.
This symbol refers to a hazard or unsafe practice which can result in severe personal injury or death.
This symbol refers to a hazard or unsafe practice which can result in personal injury or product or property damage.
If necessary, get help
These instructions are all you need for most installation sites and maintenance conditions.
If you require help for a special problem, contact our sale/service outlet or your certified dealer for additional instructions.
In case of improper installation
The manufacturer shall in no way be responsible for improper installation or maintenance service, including failure to
follow the instructions in this document.
SPECIAL PRECAUTIONS
During installation, connect before the refrigerant and hydraulic system and then the wiring one; proceed in the reverse
order when removing the units.
ELECTRICAL SHOCK CAN CAUSE SEVERE PERSONAL INJURY OR DEATH. ONLY A QUALIFIED, EXPERIENCED
ELECTRICIANS SHOULD ATTEMPT TO WIRE THIS SYSTEM.
Do not supply power to the unit until all wiring and tubing are completed or reconnected and checked, to ensure the
grounding.
Highly dangerous electrical voltages are used in this system. Carefully refer to the wiring diagram and these instructions
when wiring.
Improper connections and inadequate grounding can cause accidental injury and death.
Ground the unit following local electrical codes.
The Yellow/Green wire cannot be used for any connection different from the ground connection.
Connect all wiring tightly. Loose wiring may cause overheating at connection points and a possible fire hazard.
Do not use multi- core cable when wiring the power supply and control lines. Use separate cables for each type of line.
When transporting
Be careful when picking up and moving the unit. Get a partner to help, and bend your knees when lifting to reduce strain
on your back. Sharp edges or thin aluminium fins on the unit can cut your fingers.
When installing
Make sure the floor is strong enough to hold the unit-weight. It may be necessary to build a strong wooden or metal
frame to provide added support.
Properly insulate any tubing run inside a room to prevent “sweating”, which can cause dripping and water damage to
walls and floors.
WARNING
CAUTION
WARNING
When wiring
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Emix Tank at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Emix Tank in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Emix Tank

Argo Emix Tank User Manual - English, German - 30 pages

Argo Emix Tank User Manual - German - 29 pages

Argo Emix Tank User Manual - French - 30 pages

Argo Emix Tank User Manual - French - 29 pages

Argo Emix Tank User Manual - Italian, Portuguese, Swedish, Spanish, Finnish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info