665512
6
Zoom out
Zoom in
Previous page
1/7
Next page
13
V 06/16
CONTROL PANEL
Move the switch-on button (on the rear, beneath the air intake grille) to position ‘I’. When the appliance emits a beep, this
means that the fan heater is ready for use (stand-by). The
STAND-BY LED is lit.
By pressing the STAND-BY button ‘ ’, the appliance will start functioning in NORMAL mode, at the
COMFORT heat level
.
At this stage it is possible to leave the NORMAL operating mode or select the BODY-SENSOR mode (activation
of the PRESENCE SENSOR): the corresponding LED will light up.
In both the NORMAL and in the BODY-SENSOR modes, it is possible to select the COMFORT mode
(maximum heat 2000 W) or the ECO mode
(minimum heat 1300 W) or cool ventilation (seq.). It is also
possible to set the timer for switch-off, after 1, 2 or 4 hours.
When the COMFORT mode is selected, the appliance will first operate for 10” at minimum power before
activating the maximum heat mode.
If the unit is operating and the
STAND-BY button is pressed, the unit will continue to ventilate for a few minutes
before switching off completely, to cool the ceramic heating element.
If the unit has been in stand-by mode for quite some time, so that the heating element has already cooled
down, pressing the ON/OFF button causes the unit to switch off instantly, without ventilating.
In the BODY-SENSOR mode: every 2 minutes the unit detects the presence of people in the room, in the range
of approximately 2 metres. If is does not detect anyone and the ECO or COMFORT modes have been selected,
the heating element switches off but the fan will continue operating for 8 minutes: the unit will then enter the
stand-by mode. If the cold ventilation mode is selected, the fan will continue to operate for 10 minutes before
entering the stand-by mode.
To switch off the fan heater completely, move the on/off button to the “0” position.
STAND-BY
LED
OPERATING
MODE LED
1. STAND-BY BUTTON
2. SELECTION BUTTON
operation without PRESENCE
SENSOR (NORMAL) or with
PRESENCE SENSOR (BODY-S)
3. OPERATING MODE BUTTON
COMFORT – maximum heat (2000 W)
ECO – minimum heat (1300 W)
ventilation only
(repetition sequence)
4. TIMER BUTTON:
with the unit operating it
allows for programming the
switch-off after 1, 2 or 4
hours, by pressing it once,
twice or three times
(repetition sequence)
NORMAL or
BODY-SENSOR
MODE LED
TIMER LED
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Dream at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Dream in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Dream

Argo Dream User Manual - German - 8 pages

Argo Dream User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info