805118
7
Zoom out
Zoom in
Previous page
1/9
Next page
16V 07/22
MAINTENANCE AND STORAGE
1. Before maintenance, remember to remove the plug from the power outlet. The plug should not be removed with
wet hands.
2. Do not perform maintenance until the appliance has cooled down completely.
3. During maintenance do not moisten the appliance and do not spray water on it.
4. To clean the main body of the heater and reector, use a soft cloth. If the surface to be cleaned is very dirty,
moisten the cloth with warm water or a neutral/mild detergent before cleaning. At the end of this operation, use
a soft, dry cloth to remove excess moisture.
5. Do not apply thinners, gasoline, alcohol, kerosene, benzene, abrasive powders, alkaline detergents, rigid brushes
or the like on the paint or coating resins.
6. If dust or moisture is found at the junction between the plug and socket, due to prolonged use, remove and clean
the plug with a dry cloth, then reinsert it.
Follow these steps to clean the reector:
Remove the screw on the protection clip and pull out the protection clip (Figure A).
Push the protection from the bottom up, then gently pull out the protection (Figure B).
Remove dust from the reector and clean the tubular resistance with a damp cloth. Be careful not to damage the
resistance during cleaning.
Clean the reector and tubular resistance once or twice with a dry cloth and make sure that there is no water on
them.
After cleaning, reinstall it in the opposite sequence to disassembly and make sure the screws are securely fastened.
ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE.
IMPORTANT: DO NOT SUBMERGE THE HEATER IN WATER.
Cleaning the outside surface of the appliance
Turn the switch off and unplug the appliance before carrying out any maintenance work or moving it. Use a soft cloth
to remove any dust from the heater. If the heater is excessively dirty, use a soft cloth moistened with water and a mild
detergent at a temperature lower than 50 °C. Let the heater dry completely before use. Do not use corrosive detergents
or solvents such as petrol. Do not wash the appliance with water. Do not use oils, chemical substances or other items
to clean that may damage the surface. Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
STORAGE
If the appliance is not used for prolonged periods, it must be stored together with this manual in its original packaging,
in a cool and dry place
FIG. A FIG. B
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Alan at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Alan in the language / languages: English as an attachment in your email.

The manual is 1.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Alan

Argo Alan User Manual - German - 10 pages

Argo Alan User Manual - French - 9 pages

Argo Alan User Manual - Italian - 9 pages

Argo Alan User Manual - Spanish - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info