Manual Arcam solo mini (page 16 of 18) (English)

160363

Zoom out

Zoom in

1/18

system

Configuring the listening settings

Solo Mini allows you to adjust listening settings to suit

your taste, and to customise various system features.

Use the adjacent diagram to navigate through the items

available.

With the unit switched on (blue light showing), press

MENU on the remote control. Now use the

and

keys on the remote to move down and up the

settings available. The

{

and

}

keys on the remote

are used to adjust particular settings.

To leave the menu at any time, press

MENU again.

Balance

Balance allows you to increase the volume of one

channel (left or right) relative to the other. Altering the

balance may help to restore the stereo image for an

off-centre listening position.

Bass

This setting increases or decreases the lower frequency

components of your music.

Treble

This setting changes the relative volume of the higher

frequency components of your music.

Sleep Timer

This timer allows you to specify a listening period, after

which the volume fades into the (silent) standby mode.

CD AutoPlay

(Applies only if source is

CD.)

This setting controls the handling of a CD inserted

into the front slot. If enabled, the CD plays immediately;

if disabled, the CD waits for a command from the

remote or top panel.

Prog

(Applies only if source is

CD and a CD is loaded.)

This feature allows you to programme the playing

order of CD tracks. Scroll left or right to highlight any

of the available tracks and press

OK to transfer it to the

playback sequence.

FM Mode

(Applies only if source is

FM.)

In some weak signal areas, switching the FM tuner to

‘Mono’ can be of benet, as mono requires a much

lower signal strength to produce acceptable results. If

the signal strength in your area is good, leave FM Mode

in ‘Stereo’.

DAB Setup

(Applies only if source is

DAB.)

Selecting ‘Scan’ (conrm with

OK) causes Solo Mini to

search for new DAB stations. Found stations are added

automatically to the list of available stations.

Scanning for new stations does not erase stations that

are no longer transmitted – over time, or if you change

location, this may lead to you having stations in your

list that cannot be received. In this case, select ‘Erase

settings’ (conrm with

OK), then perform a new scan.

When the scan is complete, only stations that are

currently available in your area are shown.

Store/Erase Preset

This allows you to store a radio station that you have

tuned in to as a numbered preset (conrm with

OK).

The station can then be retrieved by pressing the

preset number on the remote.

In the same way, you can erase a particular numbered

preset (conrm with

OK).

iPod Option

(Applies to

TAPE input with rLead connected)

This allows you to Enable or Disable control of an iPod

when connected via an Arcam rLead (for rDock, this

feature is automatic).

Treble 0dB

Bass 0dB

Balance 0dB

iPod Option

Disabled

iPod Option

Enabled

F G

CD AutoPlay

Disabled

CD AutoPlay

Enabled

F G

rLead only

+Preset

–Preset

Left

Right

‘Power on’ mode

–dB

+dB

Only if source is CD

and CD loaded

Only if source is CD

Only if source is

DAB

Only if source is

DAB, FM or AM

Conrm preset

Scan for available stations

Erase list of stations

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam solo mini in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arcam solo mini

Arcam solo mini User Manual - German, Dutch, French - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam solo mini Manual

Product: