138743
4
Zoom out
Zoom in
Previous page
1/24
Next page
DV135
E-4
Positioning the unit
Place the DV135 on a level, rm surface and ensure that there is adequate ventilation for the unit.
Arcam recommend a minimum of 10cm (4”) free space above the unit.
Making video connections
To view the pictures from the DVD player you need to connect one of its video outputs to your display
device (TV, monitor, projector, etc.).
The DV135 has ve video output options, described below. You need only use one type of video from the
list; choose a type that your display device supports. If your display device does not support any of the
above connection types then you will be unable to use it with the DV135; in this case, please contact
your dealer for further assistance.
Note that you may connect equipment such as AV receivers in the signal path between the DVD player
and the display device, so long that the connected equipment also supports the type of video signal you
intend to use. For instructions on how to connect AV equipment, consult the manual for that equipment.
Using two video connections simultaneously
In some circumstances, it is possible to use two video connections simultaneously (routing one
connection to a second room or display, for example). If you wish to do this, please read these notes:
<
The Composite video and SCART outputs are only active if HDMI is not connected (or if ‘HDMI
Resolution’ is set to ‘SD Progressive’ – see page 12). These two ouput types carry interlaced
output at all times.
<
The Component video output is only active if HDMI is not connected (or if ‘HDMI Resolution’ is
set to ‘SD Progressive’ – see page 12). It can be set to carry either interlaced or progressive-
scan output.
<
The HDMI output is active only if a compatible display is detected by the DV135. It can be set to
carry either interlaced, progressive-scan or high-denition output.
<
The S-video output is active only when the Component and HDMI outputs are carrying interlaced
video.
HDMI digital video
The HDMI connector offers uncompressed digital video and audio transmission between the
DV135 and the display device, and provides the highest quality output. Generally, it is also the
easiest connection type to congure.
To use this video connection, you will require a HDMI or HDMI/DVI cable between the DV135 and your
display device or receiver. The DV135 supports HDMI version 1.0.
Component video
Use three 75Ω phono cables to connect the Component Y, Pb, Pr outputs of the DVD player to the Y,
Pb, Pr inputs of the display device. Ensure that the cables are suitable for video use and that they are
approximately the same length.
If your television is capable of accepting a progressively scanned
(de-interlaced) video signal, you may wish to use the progressive
video output from the DV135. If you are unsure whether your
display device can accept progressive video, please refer to its
instruction manual or consult your dealer.
Some component video interfaces are labelled differently to the
DV135; see the table if the component inputs of your display device
are not labelled ‘Y, Pb, Pr’.
Installation











  















DV135 alternative alternative alternative
Y Y Y Y
Pb Cb (B–Y) U
Pr Cr (RY) V
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam dv 135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam dv 135 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info