578760
10
Zoom out
Zoom in
Previous page
1/14
Next page
A85/P85
10
Connecting to power, loudspeakers and
other equipment
Follow the installation instructions for the integrated ampli er
on pages 46.
AUDIO IN Connect this input to the output sockets of your pre-
ampli er or the PRE OUT sockets of an integrated ampli er.
MONO LINK The power ampli er can be adapted to provide
two mono loudspeaker outputs from a single input. Pull out the
link supplied and use it to connect the
L and R AUDIO OUT
sockets together. Using one power ampli er per loudspeaker
will enable you to bi-amplify bi-wireable loudspeakers.
This is particularly bene cial for top quality stereo installations
with a separate pre-ampli er, or where ampli ers are provided
for the left, centre and right channel loudspeakers in a ve
speaker Dolby Pro Logic or Dolby Digital system.
Contact your Arcam dealer for more information.
Daisy chaining The power ampli er can be connected to
further power ampli ers to drive more speakers (e.g. those in
other rooms or tri-ampli ed speakers, etc).
Connect the extra power ampli er inputs to the
AUDIO OUT
sockets on the power ampli er, left to left, right to right.
Installation: P85 power amplifer
Remote switching
By making a connection from the REMOTE IN socket of the P85
power ampli er to the TRIG OUT socket of the A85 integrated
ampli er, you can use the A85 to switch the power ampli er on
and off. If con gured in this way, the front panel POWER button
of the A85 (or the Power/Standby button on the remote control)
switches both ampli ers on and off together. This facility allows
you to conceal the power ampli er yet still control it.
The connecting cable required is a 3.5mm to 3.5mm jack lead
(stereo or mono) and it is possible to connect several power
ampli ers to an A85 by daisy chaining from
TRIG OUT of one
P85 into the REMOTE IN of the next.
Three channel option
The power ampli er can be upgraded from stereo to three
channels by adding a Third Channel Module: in this case, the
model is designated P85/3.
The module offers extra loudspeaker terminals together with
a third set of
AUDIO IN and OUT phono sockets and converts
the P85 into a 3 x 85W (RMS per channel into 8) ampli er
suitable for Home Cinema or multi-channel audio use.
Contact your Arcam dealer for further details.
+ R/CH1
CTR/CH3
SP1
SP2
POWER INLET
OUTIN
L
R
VOLTAGE
SELECT
230V
4 16 OHMS
+
L/CH2
+
R/CH1
+
L/CH2
AUDIO
SP1
SP2
4 16 OHMS
+ CTR/CH3
+
CTR/CH3
AUDIO
IN
OUT
LINK
REMOTE
IN
TRIG
OUT
Optional Third Channel Module
provides a third 85W channel
suitable for Home Cinema or
multi-channel audio use.
A85/P85 multi.id 03/29/01, 3:43 PM10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DiVA P85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA P85 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info