730130
1
Zoom out
Zoom in
Previous page
1/3
Next page
Aqara (Zigbee) Light control
Overview
Wall switch (ZigBee two-key switch) is a wireless light
switch. Installing this unit is very easy and fast. You do not
have to change an existing equipment and wires routes.
You need only replace traditional wall switch. Connect your
device to Mi multifunction gateway for remote control and
other Smart devices. In the event of an overload or excess
temperature, the device is automatically disconnected from
a power supply.
Installing
* Installation and adjustment of the device must be
carried out by qualied personnel according to electrical
regulations and guidelines set out in the manual of the
device.
* Before using, please turn o the main switch on the
electric board. After installing the unit turn the main
switch on the electric board, open Mi Smart Home APP
and connect wall switch to Mi multifunction gateway (see
section «Setup» and «Add new device»). You can not use
the device with Smart Lamp and dual control scheme.
Keys
Indicator
Input slot
Each key of wall switch is designed to control a one
elelctric chain of lamps. Method of installation:
1. Turn o the main switch on switchgears, loosen the
screws on the back of the device, insert a positive wire to
connector L, and a lamp wire to sockets L1 and L2. (Note:
lamp, connected to sockets L1 and L2, on / o by right and
left keys), tighten the screws.
2. Use a screwdriver with a straight tip to open a top panel
of switch.
3. Firmly attach the wall switch to terminal box using
screws.
Installing
4. Attach top panel of the wall switch.
5. Turn on the main switch on the electricity board. Fast
blinking blue light indicates the normal power supply. If you
press the button, start slowly blinking red, which indicates
normal operation of the device and no network connection.
Install an application, and then add a new device to the list
of devices.
Installing of Mi Smart Home APP
To install the client application on your smartphone, open
Mi Store and search for «Mi Smart Home» APP or scan
the QR-Code. You can connect with Mi-rich gateway, after
which, according to instructions in
section «Adding a new device,»
adding wall switch (ZigBee
switch) to the list of devices.
This device is already in the list
of devices in «Mi Smart Home»,
supports MIUI system, and can
be combined with other smart
devices to your home.
More Smart devices you nd in
mobile app Mi «Smart Home» or after visiting site mi.com
and registering.
XIAOMI-MI.COM
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aqara Smart Light Control Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aqara Smart Light Control Set in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info