622308
5
Zoom out
Zoom in
Previous page
1/29
Next page
4
7. Range Switch, (Manual Range) Range switch is pressed to select manual ranging and to change ranges.
When Range switch is pressed RANGE annunciator on the LCD
appears. Press RANGE switch to select appropriate range to be used.
Press RANGE switch and hold for 2 seconds to return to Autoranging.
8. Blue Switch Press the switch to measure AC Voltage / Current or DC Voltage/Current in the Voltage /
Current mode, or to measure Resistance or continuity or diode in / / mode.
9. Hold Switch This switch is used to hold a measured value for all functions, when pressed the HOLD
annunciator is displayed. Conversions are made but the display is not updated.
10.
%
Hz Switch This switch is used to quickly view the frequency during measurement of the AC voltage or
current. Press % Hz switch so that the LCD is changed to display frequency. Press
% Hz switch again, the LCD reverts back to display the AC signal amplitude reading. In
% Hz mode, pressing RANGE switch does not change the frequency range.
However the RANGE key switch changes the sensitivity of frequency detection, if the input
signal amplitude is less than 1% of full scale reading, the user shall increase the sensitivity.
Pressing the Range switch in % Hz mode also changes the full scale range of the original
voltage or current mode.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Appa 97 II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Appa 97 II in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info