Manual Anker Soundcore Flare 2 (page 3 of 79) (All languages)

722078

Zoom out

Zoom in

1/79

EN 03 04 EN

Bluetooth Pairing

FLARE 2

<2”

Soundcore Flare 2

FLARE 2 FLARE 2

Press Enter Bluetooth pairing mode

Flashing blue Bluetooth pairing

Steady blue Bluetooth connected

• When powered on, the speaker will automatically connect to the last connected

device if available within the Bluetooth range. If not, press the Bluetooth button

to enter the Bluetooth pairing mode.

• To pair with another device, press the Bluetooth button to re-enter the pairing

mode.

PartyCast Mode

Set up one Flare 2 as the primary speaker and connect it with more than 100+ secondary Flare

2 speakers to control audio and all the light effects.

Set up the primary speaker:

1. Connect one Flare 2 speaker to your phone or other devices via Bluetooth. When

successfully connected, the Bluetooth LED will turn blue.

2. Press and hold the Bluetooth button on this Flare 2 for 3 seconds until you hear a sound and

the Bluetooth LED ashes white to indicate this Flare 2 is the primary speaker.

• The Bluetooth LED on the primary speaker will keep ashing white.

Connect with secondary speakers:

1. Make sure the secondary speakers aren't connected to any Bluetooth devices.

• Press the Bluetooth button to disconnect Flare 2 from a device, the Bluetooth

LED will ash blue.

2. Press the Bluetooth button for 3 seconds until you hear a sound and the Bluetooth LED

ashes white to indicate the secondary speaker is in connection mode.

3. When the secondary speakers are close to the primary speaker, they will connect to the

primary speaker automatically. When successfully connected, the Bluetooth LED on the

primary speaker will continue ashing white, while on the secondary speakers will turn white.

FLARE 2

>3”

FLARE 2

When successfully enter the PartyCast mode:

• you can power off, adjust the volume, or switch light effects for all speakers by controlling

the primary speaker only;

• you can power off or switch light effects for each secondary speaker individually;

• you can't adjust the volume for each secondary speaker individually;

• to exit the PartyCast mode, press the Bluetooth button either on the primary speaker or

on the primary speaker for 3 seconds until the Bluetooth LED ashes blue.

Button Controls

Play / Pause X1 Press

Next track X2 Press twice

Previous track X3 Press thrice

Bass Boost On / Off X1 Press

When I increase the volume on my soundcard flare 2 speaker the Bluetooth connection goes on and off until volume is decreases. Thanks Submitted on 28-3-2021 at 07:12
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Anker Soundcore Flare 2 in the language / languages: All languages as an attachment in your email.

The manual is 22,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Anker Soundcore Flare 2 Manual

Product: