681989
5
Zoom out
Zoom in
Previous page
1/64
Next page
STEP 2  POSITIONING THE MOVEMENT SENSOR PAD
2.1  POWERING THE MOVEMENT SENSOR PAD
When using the Sensor Pad for the first time, you will need to insert the provided CR3032 battery.
1) Remove the battery cover using a coin.
Turn in the direction of the arrow.
2) Place the included battery (CR3032) in
the compartment.
Note: e + symbol should be facing
up.
3) Replace the battery cover (the two
dots will line up). e Sensor Pad is now
Activated.
IMPORTANT: To prevent false alarms
we recommend that the CR3032 3V
battery is replaced every 4 months.
2.2  INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT
IMPORTANT
If your cot does not have a solid, stationary, completely flat, firm surface including a spring
or slat base, place a hard board between the crib base and the Sensor Pad, to ensure correct
operation.
e hardboard support must measure at least 33 x 33 cm (13” x 13”) and 6 mm (1/4”) thick.
is hardboard support must be larger than the Sensor Pad surface area.
e Sensor Pad functions with any size and type of mattress except memory-foam
mattresses, hollow frame mattresses and water beds. e hardboard maintains a constant
pressure on the Sensor Pad, enabling it to detect the baby’s movements even when the baby
is at the edges of the cot.
Hardboard
Sensor Pad
2
1) Remove the mattress from the crib.
2) Place the Sensor Pad - Angelcare
®
logo
side
up - in the center of the mattress. It should be
centered on the hardboard if your crib requires a
hardboard support.
3) Replace the mattress.
IMPORTANT!
Ensure the Sensor Pad is in the center of the Cot – printed or Logo side up – on top of the hardboard.
Check the position is central before each use.
BEFORE FIRST TIME USE: To test that the unit is ready for use, refer to instruction manual on how to test
that the installation has been done correctly.
5
E
N
256AC_07_Manuel_AC517_NA_m4.indd 5 2018-08-15 10:15 AM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC517 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC517 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 13,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC517

Angelcare AC517 Quick start guide - English - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info