537060
15
Zoom out
Zoom in
Previous page
1/16
Next page
The sound
transmission is
intermittent
The power ON
indicator on the
Nursery Unit does
not light up
There is very weak
reception
There is interference
or noise coming
from the Parent Unit
(e.g. interference
from other monitors,
wireless phones and
networks, walkie-
talkies, etc.)
There is ‘feedback’
coming from the
Parent Unit (loud
howling noise)
The mattress has
become mouldy
There is no video
transmission
The sound transmission is set to Voice Activated
and will only transmit if the microphone on the
Nursery Unit detects a certain level of sound.
The AC adaptors are not connected properly or the
mains socket is out of order or not switched on.
The Nursery unit is not turned ON.
The Parent and Nursery Units are too far apart
and the ‘Out of Range’ indicator is OFF.
One or both units are placed near a large metal
construction which obstructs the transmission.
One or both units are not in the upright position.
The batteries are low.
The Parent Unit is located near motorized devices,
uorescent lights, televisions, etc.
The Parent Unit and the Nursery Unit are too close
together.
There is not enough air circulation under the
mattress.
The video screen has been turned OFF.
The Power Save Function has been activated.
Increase the microphone sensitivity if you would like to keep Voice
Activated sound transmission or activate Continuous Sound transmission.
Please see Step 7 for further instructions.
Check the connections and/or change to another electrical socket.
Press and hold the left wing backwards for 2 seconds to turn ON the
Nursery Unit (see Step 2a).
Reduce the distance between the two units until communication is
established. Ensure both units are ON. Turn the Out of Range function ON
to avoid this in the future (see Step 15).
Reduce the distance between the two units until communication is
established. Ensure both units are ON. Turn the Out of Range function ON
to avoid this in the future (see Step 15).
Place both units on a fl at surface away from baby’s reach.
Check/replace the batteries or recharge the Parent Unit (see Step 3a).
Check if all AC adaptors are working correctly and if the mains socket is
turned ON.
Keep the Parent Unit and the Nursery Unit away from any devices that
can be a source of interference.
Keep the Parent and Nursery Units at least 3 metres/10 feet apart.
Decrease the volume level on the Parent Unit using the UP and DOWN
buttons on the right hand side of the Parent Unit.
If you have placed a large piece of plywood under the SensorPad as
instructed, please drill holes in the plywood to allow air circulation. The
SensorPad is a passive device and does not radiate any form of energy
or heat.
• Press the ON/OFF button on the left hand side of the Parent Unit to
start the video transmission.
• Press the video screen to start the video transmission.
• Deactivate the Power Save Function.
• For further instructions, see Step 9.
Troubleshooting (continued)
Consumer Helpline: 0845 009 1789 | www.angelcare-uk.co.uk
15
AC1100_Manual.indd 15AC1100_Manual.indd 15 19/5/11 2:39:21 pm19/5/11 2:39:21 pm
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC1100 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC1100

Angelcare AC1100 User Manual - Dutch, Danish - 83 pages

Angelcare AC1100 User Manual - French - 59 pages

Angelcare AC1100 User Manual - Polish, Portuguese, Swedish - 83 pages

Angelcare AC1100 User Manual - Spanish - 59 pages

Angelcare AC1100 User Manual - Finnish - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info