Electric Ventilation Fans are for internal use only.
This equipment should only be used by a competent person
who has read and understood these instructions.
Check condition of equipment before use. If unit is showing
any signs of damage contact your supplier immediately.
.
Never operate this equipment if you are ill, feeling tired or
under the inuence of alcohol or drugs.
Do not use in wet or damp conditions.
Keep all vents and grilles clear of obstructions.
Keep children and animals away from electric appliances.
Never leave them alone in room where the units in use.
Make sure equipment is switched o and unplugged after use.
230 volt units require a standard domestic 13 amp socket.
110 volt units require a 32 amp BS 4343 power supply
Always inspect plugs and power cables for damage before plugging
into power supply.
DO NOT USE IF ANY DAMAGE IS FOUND.
Ensure cables are installed so as not to cause a hazard.
If an extension lead is used, ensure it is of the correct standard and fully
uncoiled before use.
Cables must not be laid in wet or damp areas.
Do not move equipment while operating.
Do not pull equipment by the power lead.
It is recommended that the electrical supply to this equipment is
protected by an RCD.
Position equipment on level ground
Fig 1
Apply the brakes to the castor wheels
1. Connect to electrical supply
Fig 2
2. Switch on power and set rocker switch to
position 1
Fig 3
3. Select required fan speed (Variable speed
versions only)
4. Switch o power and unplug unit when
nished with.
CAUTION Ear defenders should be worn when
fan is running at full speed. Max 85dba @ 1mt.
Fig 1
Fig 2
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Andrews ASF 950 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Andrews ASF 950 in the language / languages: English as an attachment in your email.
The manual is 0,19 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
