403196
11
Zoom out
Zoom in
Previous page
1/13
Next page
Establishing Baseline Measurements
The most important method to get an accurate blood pressure measurement
is consistency. To get the most benefit out of your monitor, it is important
to establish a “baseline measurement.” This helps build a foundation of
measurements that you can use to compare against future readings. To build
this baseline measurement, devote two weeks for consistent blood pressure
monitoring. This involves doing everything the same way when you measure
(e.g. measuring during the same time of day, in the same location, sitting in
the same chair, using the same cuff, etc.). Once you establish your baseline
measurement, you can start evaluating if your measurement has been affected
based on things lifestyle changes or medication treatment.
How Do I Record My Blood Pressure?
Blood pressure readings are typically recorded with the systolic pressure writ-
ten first, followed by a slash mark and the diastolic pressure. For example,
120 mmHg systolic and 80 mmHg diastolic measurements are written as
120/80. Pulse is simply written with the letter “P” followed by the pulse
rate—P 72, for example. Please see the back of the manual for the blood
pressure tracking record.
Customer Support Tools Online
Additional tools are available on www.LifeSourceOnline.com (in Canada -
www.autocontrol.com) to help you get the most out of your blood pressure
monitoring. These include:
Large Print Instruction Manuals
Animated Operating Instructions for select models
Additional Logbook Sheets
ABOUT BLOOD PRESSURE
LifeSource Health Line (Toll-Free): 1-888-726-9966
E-16
TROUBLESHOOTING
Problem
Nothing appears
in the display, after
I press the START
button.
The cuff does not
inflate.
The unit does not
measure. Readings
are too high or too
low.
The value is differ-
ent from that
measured at a clinic
or doctor’s office.
Probable cause
Batteries are drained.
Battery terminals are not in
the correct position.
Battery voltage is too low.
Low battery symbol blinks.
[If the batteries are drained
completely, the mark does
not appear.]
The cuff is not fastened
properly.
You moved your arm or
body during the
measurement.
The cuff position is not
correct.
You are using the wrong
size cuff.
Taking too many readings
on the same arm in a short
period of time.
The healthcare professional
may be using a different
sized cuff.
Your measurements may
be elevated by white coat
hypertension
NOTE: If the actions described above do not solve the problem, call 1-
888-726-9966 (In Canada - 1-800-461-0991). Do not attempt to repair the
device yourself.
Corrective action
Replace all batteries with new
ones. Alkaline batteries
recommended.
Reinstall the batteries with
negative and positive termi
-
nals matching those indicated
in the battery compartment.
Replace all batteries with new
ones. Alkaline batteries rec
-
ommended.
Fasten the cuff correctly.
Make sure you remain very
still and quiet during the mea
-
surement.
Sit comfortably and still. Make
sure the cuff is at the same
level as your heart.
See Pg. E-5 "Selecting the
Correct Cuff."
Relax five minutes before each
measurement.
See Pg. E-15 "Answers to
Why Your Readings Are
Different Between Home and
the Doctor’s Office."
See Pg. E-14 "Why Measure
Blood Pressure at Home."
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
E-17
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AnD ua 767 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AnD ua 767 plus in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info