Manual Amplicomms BigTel 48 (page 23 of 74) (English, German, Dutch, French, Italian, Spanish)

747131

Zoom out

Zoom in

1/74

R-SIGNAL BUTTON

5.3 Dialling and storing telephone numbers when using on

private exchanges

Note! The pause function after an outside line code (usually 0 or 9) descri-

bed in this chapter is only required on older private exchanges.

With some private exchanges, there is a short pause between the code for

the outside line (usually 0 or 9) and the dialling tone. When dialling manual-

ly and when dialling using the direct dial and speed dial buttons, this pause

can be entered along with the number so that the following digits are not

dialled too quickly.

5.3.1 Entering the pause when dialling manually

Press the button once between the number for the outside line and the

actual telephone number. The pause will be shown by a "P" in the display.

After connecting to an outside line your telephone will wait for three

seconds before dialling the actual telephone number

5.3.2 Storing the pause

When storing a number, simply press the button after the number for

the outside line and before the actual telephone number. The pause will be

shown by a "P" in the display. When dialling using the direct dial or speed

dial buttons a pause of three seconds will automatically be inserted after

the number for the outside line.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Amplicomms BigTel 48 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Amplicomms BigTel 48 Manual

Product: