668484
5
Zoom out
Zoom in
Previous page
1/11
Next page
4
1.0 Safety precautions and warnings GB
Before starting up your steam cleaner, we advise you to carefully read through this section (1.0) and section
2.0. Follow all instructions to minimise the risk of injuries when using the machine.
l The machine must only be operated by persons,
who have read and understood this instruction
manual.
l WARNING! Never direct the steam jet towards
persons or animals. This may cause serious burns.
l WARNING! Never use the steam cleaner on
electrical installations (plugs, lamps or the like)
or the machine itself.
l WARNING! If the steam cleaner is used on
electrical appliances, these should be
disconnected from the power supply, and the
cleaning should be made according to the
instructions of the manufacturer. Never re-
connect electrical appliances until they are
completely dry.
l WARNING! Never try to clean clothes or
footwear on yourself or other persons.
l WARNING! Children and steam may be a
dangerous combination. Therefore never leave
the steam cleaner without supervision if
connected or with steam pressure.
l WARNING! Be careful if you want to empty the
steam cleaner of hot water. The water may be close
to boiling point and there is a risk of steam leak.
l Avoid damaging the electric cable such as
running over by a car, squeezing, pulling,
knotting/kinking and keep it away from sharp or
hot objects.
l Do not use the machine if the electric cable or
other important parts of the equipment are
damaged - e.g. safety devices, hoses, handle or
cabinet.
l The machine should not be covered during
operation.
General
l Steam cleaning of asbestos-containing and other
dangerous or poisonous materials is not allowed.
l Always unplug the machine before cleaning the
machine.
l Never use the machine in an environment where
there could be a danger of explosion.
l Of safety reasons only use original ALTO
accessories and spare parts.
Safety devices on the machine
l The release (11) is fitted with a lock (12). When the
lock is activated, the release cannot be controlled.
l The socket for water filling is fitted with a child
resistant screw cap. Press the screw cap down
while unscrewing it.
Prior to operation
Before starting up your steam cleaner please check it
carefully for any defects. If you find any, do not start
up the cleaner and contact your ALTO distributor.
Especially check:
l The insulation of the electric cable should be
faultless and without any cracks. If the electric
cable is damaged, it should be replaced by an
authorized ALTO distributor.
l Check that the voltage stated on the model tag of
the machine corresponds to your mains voltage.
l Check that the electric fuse exceeds the power
consumption stated on the model tag of the machine.
Mains power connection
The following should be observed when connecting
the steam cleaner to the electric installation:
l The electric installation shall be made by a
certified electrician.
l It is strongly recommended that the electric
supply to this machine should include a residual
current device.
l Do not touch plug and socket with wet hands.
Wiring instruction for UK
1. This unit must be earthed. The green or green and
yellow wire must be connected to the earth terminal
marked E or by the earth symbol.
2. The brown or red wire should be connected to the
live terminal marked L.
3. The blue or black wire should be connected to
neutral terminal marked N.
Fuse rating: This unit should be protected by a 13
amp fuse to BS1362.
Should you have any doubts please contact our
Customer Support department on 01768 868995 or
your nearest ALTO distributor.
Extension cable
If you want to apply an extension cable when
operating your steam cleaner, make sure that it is
strong enough to carry the power consumption of
the steam cleaner (see model tag and contact a
certified electrician).
Always make sure that the extension cable is intact
before operation.
Application
l The steam cleaner is only intended for domestic
use.
Downloaded from www.Manualslib.com manuals search engine
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto ctr 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto ctr 2000 in the language / languages: Dutch as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info