97236
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
Symptom Possible Problem Solution
No Power LED is lit
(AC Operation).
The power supply isnt connected to a wall
outlet and/or the power supply connector
is not plugged into the power supply jack
on the back of the T612 system.
Insert the barrel connector from the power supply into the DC connector
on the rear of the T612 system. After this connection is made, insert the
power supply into a wall outlet.
The surge protector (if used) isn’t powered
on.
If the power supply is plugged into a surge protector, make sure the
surge protector is switched on.
The wall outlet is not functioning. Plug another device into the same wall outlet to conrm the outlet is
working.
The power isn’t turned on. Turn on the T612 by pushing the power button located on the top of the
unit. A LED will light when the power is on.
No sound is coming
from speakers.
The volume is set too low. Press and hold the “+” button on the top of the T612 to increase the
volume.
Check the volume level on alternate audio source device and set at
mid-level.
The iPhone or iPod is not correctly seated
into the docking station.
Turn off the iPhone or iPod, remove it from the docking station, reseat it,
and turn it on again.
If using an alternate audio source, the
audio source is not properly connected to
the T612 or there is a problem with the
alternate audio source.
Try using another sound source, such as another CD or MP player. See
the “Connecting to alternate audio source” section for details.
There is a crackling
sound coming
from speakers.
The iPhone or iPod is not correctly seated
into the docking station.
Turn off the iPhone or iPod, remove it from the docking station, reseat it,
and turn it on again.
If using an alternate audio source, the
audio source is not properly connected to
the T612 or there is a problem with the
alternate audio source.
Try using another sound source, such as another CD or MP player. See
the “Connecting to alternate audio source” section for details.
There is a crackling
sound coming from
speakers (when
connected to PC
or laptop).
The operating systems volume level is set
too high.
Check the operating system volume level and decrease it if necessary.
The sound
is distorted.
The T612’s volume level is set too high. Press and hold the “–” button on the top of the T612 to decrease the
volume.
The EQ function on the iPhone, iPod or
alternate audio source is not disabled.
Disable the EQ function on the iPhone, iPod or alternate audio source.
See the device user’s guide for details.
The T612
exhibits erratic
or unexpected
behavior. Controls
do not function.
Static electricity, momentary interruption
of power, or abnormal operating conditions
may be responsible.
1. Disconnect the power supply from the wall outlet.
2. Reconnect the power supply.
Troubleshooting
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Altec Lansing T612 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Altec Lansing T612 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info