160891

Altec Lansing im 600 Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
5
The
rechargeable
battery
won’t
charge and
no power
indicator
light is
on (AC
operation).
No Power
indicator
light is on
(Battery
operation).
No sound is
coming from
speakers.
The surge protector (if used) isn’t
powered on.
The wall outlet is not functioning.
The power isn’t turned on.
The rechargeable battery isn’t
charged.
The power isn’t turned on.
The volume is set too low.
An incorrect source has been selected.
The iPod is not correctly seated into
the docking station.
If using an alternate audio source, the
audio source is not properly connected
to the inMotion iM600 or there is a
problem with the alternate audio
source.
If the power supply cord is plugged into a surge
protector, make sure the surge protector is switched on.
Plug another device into the same wall outlet to
confirm the outlet is working.
Turn on the inMotion iM600 by pushing the button.
The indicator light turns on.
Recharge the battery (see the “Power” section for
details.)
Turn on the inMotion iM600 by pushing the button.
The indicator light turns on.
The “+” and “–” buttons control the master volume.
Press and hold the “+” button to increase the volume.
Check the volume level on alternate audio source
device and set at mid-level.
Press the SOURCE button until the appropriate source
is displayed on the LCD screen.
Turn off the iPod, remove it from the docking station,
reseat it, and turn it on again.
• Connect an alternate audio source—such as a CD
player, MP3 player, or portable DVD player—to your
inMotion iM600 by plugging one end of a 3.5mm
stereo cable (sold separately) to the line out of your
portable device (if it has one) or to the device’s
headphone jack. Connect the other end to the input
marked “AUX” on the back of the inMotion iM600.
• Set the volume on the audio source at mid-level.
• Set the volume on the inMotion iM600 at minimum
level and adjust upward to a comfortable listening
level.
Troubleshooting
Symptom Possible Problem Solution
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Altec Lansing im 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Altec Lansing im 600 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info