466968

Alpine SWD-2030 Manual

3
Zoom out
Zoom in
Previous page
1/10
Next page
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURLEY. Be sure to use only
the specified accessory parts. Use of other than designated parts may damage this unit internally
or may not securely install the unit in place. This may cause parts to become loose resulting in
hazards or product failure.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE
GROUND CONNECTIONS. Bolts or nuts used for the brake, steering systems (or any other safety
related system), or any storage tanks should NEVER be used for installations or ground
connections. Using such parts could disable control of the vehicle and/or cause fire, etc.
HALT USE IMMEDIATLEY IF A PROBLEM APPEARS. Failure to do so may cause personal
injury or damage to the product. Return it to your Authorised Alpine Dealer or the nearest Alpine
Service Centre for repairing.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY
DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle in a safe location before
performing these functions, Failure to do so may result in an accident.
This symbol means important instructions.
Failure to heed them can result in injury or property damage
CAUTION
MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire
or product damage.
ROUTE THE WIRING TO ENSURE IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL
EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed
edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of
the hole.
DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside
and may result in fire.
HAVE THE WIRING AND INSTALLATION DONE BY AN EXPERT. The wiring and installation of
this unit requires special technical skill and experience. To ensure safety, always contact the
dealer where you purchased this product to have the work done.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in
locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE
DRIVING. Failure to do so may result in an accident.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed
application may result in fire, electric shock or injury.
EN
3
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine SWD-2030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine SWD-2030 in the language / languages: English, German, French, Italian, Swedish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info