537003
5
Zoom out
Zoom in
Previous page
1/20
Next page
English Français Español
5
ALPINE PDX-V9 68-21057Z20-A (EN/FR/ES)
B. Stack installation of two units
1. Firstly, securely install one unit, as described in steps 1-3 of A
above.
2. Attach the Stacking Plates (included with other PDX models) on
the first unit with Machine Screws M3 x 7 (included with other
PDX models). Refer to Fig. 3.
3. Stack the second unit on top of the installed unit.
4. Attach the second unit with four Machine Screws M4 x 24
(included with other product). Refer to Fig. 4.
5. Attach the Top Cover to the second unit.
C. Stack installation of three units
1. Firstly, securely install the first two units firmly as described in
steps 1 to 4 of B above.
2. Next, install the third unit as described for the second unit
in B above. With this, stacked installation of the 3 units is
completed.
B. Installation de deux unités empilées
1. Fixez tout d’abord une unité en suivant les étapes 1 à 3 ci-
dessus.
2. Fixez les plaques d’empilement (fournies avec d’autres modèles
PDX) sur la première unité à l’aide de vis mécaniques M3 x 7
(fournies avec d’autres modèles PDX). Reportez-vous à la Fig. 3.
3. Empilez la seconde unité sur l’unité installée.
4. Fixez la seconde unité avec les quatre vis mécaniques M4 x 24
(fournies avec d’autres modèles PDX). Reportez-vous à la Fig. 4.
5. Fixez le couvercle supérieur de la seconde unité.
C. Installation de trois unités empilées
1. Fixez tout d’abord les deux unités en vous reportant aux étapes
1 à 4 du point B.
2. Ensuite, installez la troisième unité de la manière décrite pour la
deuxième unité au point B ci-dessus. Linstallation des 3 unités
empilées est terminée.
B. Instalación de dos unidades en una pila
1. En primer lugar, instale correctamente una de las unidades, tal
como se describe en los pasos 1-3 de la sección A anterior.
2. Coloque las placas de apilamiento (incluidas con otros modelos
de PDX) sobre la primera unidad con ayuda de los tornillos
mecánicos M3 x 7 (incluidos con otros modelos de PDX).
Consulte la figura 3.
3. Apile la segunda unidad sobre la unidad ya instalada.
4. Fije la segunda unidad con cuatro tornillos mecánicos M4 x 24
(incluido con otros modelos de PDX). Consulte la figura 4.
5. Fije la tapa superior en la segunda unidad.
C. Instalación de tres unidades en una pila
1. En primer lugar, instale correctamente las dos primeras
unidades, tal como se describe en los pasos 1-4 de la sección B
anterior.
2. A continuación, instale la tercera unidad tal y como se describe
para la segunda unidad en B anteriormente. Con esto, la
instalación apilada de las 3 unidades queda finalizada.
A Top Cover/
Couvercle supérieur/
Tapa superior
A Self-Tapping Screw (M4 x
36)/
Vis auto-taraudées/
Tornillos autorroscantes
B Ground Lead/
Conducteur de mise à la
terre/
Cable de tierra
C Hole/
Trous/
Agujeros/
Fig. 1 Fig. 2
A Machine Screw (M3 x 7)/
Vis mécanique/
Tornillo mecánico
B Stacking Plate/
Plateau d’empilement/
Placa de apilamiento
A Machine Screw (M4 x 24)/
Vis mécanique/
Tornillo mecánico
Fig. 3 Fig. 4
Tabs/Languettes/Pestañas
Second unit/
Deuxième unité/
Segunda unidad
First unit/
première unité/
Primera unidad
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine PDX-V9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine PDX-V9 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info