66421
4
Zoom out
Zoom in
Previous page
1/24
Next page
4
Español
Français
English
CAUTION
CONNECTIONS OF POWER
SUPPLY TERMINAL
Before connecting the power supply wire to the
unit, be sure to remove the negative (–) terminal of
the vehicle’s battery.
Make the power supply wire connection to the
battery positive (+) terminal of the unit, before
connecting the wire to the positive (+) terminal
of the vehicle’s battery .
When connecting the power supply wire to the
unit, be sure not to short the wire.
If you tighten the screw to fix the power supply
wire on the unit after the power supply
connection is completed, the tool may touch the
unit and may cause a short-circuit.
Be sure not to allow the power supply wire to
be exposed outside the terminal.
Fix the power supply wire securely to prevent
disconnection or dropping.
When tightening the screw to fix the power supply
wire, be sure not to touch the tool to the unit.
ATTENTION
CONNEXIONS DE LA BORNE
DALIMENTATION
Avant de connecter le fil d’alimentation à l’unité,
s’assurer de retirer la borne négative (–) de la
batterie du véhicule.
Faire la connexion de fil d’alimentation à la
borne positive (+) de l’unité, avant de connecter
le fil à la borne positive (+) de la batterie du
véhicule.
Lors de la connexion du fil d’alimentation à l’unité,
s’assurer de ne pas court-circuiter le fil.
Si vous serrez la vis pour fixer le fil d’alimenta-
tion à l’unité après que la connexion d’alimenta-
tion est terminée, l’outil peut toucher l’unité et
peut causer un court-circuit.
S’assurer de ne pas permettre au fil d’alimenta-
tion d’être exposé à l’extérieur de la borne.
Fixer le fil d’alimentation fermement afin
d’empêcher qu’il se déconnecte ou tombe.
Lors du serrage de la vis pour fixer le fil d’alimen-
tation, s’assurer de ne pas toucher l’outil ou
l’unité.
PRUDENCIA
CONEXIONES DEL TERMINAL
DE ALIMENTACIÓN
Antes de conectar el alambre de alimentación a la
unidad, asegúrese de desconectar negativo (–) de
la batería del vehículo.
Realice la conexión del alambre de alimentación
al terminal (+) de la unidad, antes de conectar el
alambre al terminal positivo (+) de la batería del
vehículo.
Al conectar el alambre de alimentación a la unidad,
asegúrese de no cortocircuitar el alambre.
Si aprieta el tornillo para fijar el alambre de
alimentación en la unidad después de haber
realizado la conexión de alimentación, la
herramienta puede tocar la unidad y provocar
un cortocircuito.
No permita que el alambre de alimentación
quede expuesto fuera del terminal.
Fije el alambre de alimentación en forma segura
para evitar que se desconecte o se caiga.
Cuando apriete el tornillo para fijar el alambre de
alimentación, asegúrese de no tocar la unidad con
la herramienta.
Connected Battery/
Batterie Reliée/
Batería Conectada
Connected Battery/
Batterie Reliée/
Batería Conectada
Fig. 1
Fig. 2
Fig. 3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine MRV-F545 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine MRV-F545 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info