168362
22
Zoom out
Zoom in
Previous page
1/24
Next page
22
Español
Français
English
ESPECIFICACIONES
Salida de potencia: Potencia continua RMS (a 12,0V, de 20 Hz a
20 kHz)
MRV-1507
Por canal en 4 ohmios ............................ 150W, 0,04% DAT
Por canal en 2 ohmios ............................. 300W, 0,3% DAT
Ponteado en 4 ohmios ............................. 600W, 0,3% DAT
MRV-T757
Por canal en 4 ohmios .............................. 75W, 0,04% DAT
Por canal en 2 ohmios ............................. 150W, 0,3% DAT
Ponteado en 4 ohmios ............................. 300W, 0,3% DAT
MRV-F407 (CH-1 – CH-4)
Por canal en 4 ohmios .............................. 40W, 0,04% DAT
Por canal en 2 ohmios ............................... 50W, 0,3% DAT
Ponteado en 4 ohmios ............................. 100W, 0,3% DAT
Salida de potencia: Potencia continua RMS (a 14,4V, de 20 Hz a
20 kHz)
MRV-1507
Por canal en 4 ohmios ............................ 225W, 0,04% DAT
Por canal en 2 ohmios ............................. 450W, 0,3% DAT
Ponteado en 4 ohmios ............................. 900W, 0,3% DAT
MRV-T757
Por canal en 4 ohmios ............................ 100W, 0,04% DAT
Por canal en 2 ohmios ............................. 200W, 0,3% DAT
Ponteado en 4 ohmios ............................. 400W, 0,3% DAT
MRV-F407 (CH-1 – CH-4)
Por canal en 4 ohmios .............................. 60W, 0,04% DAT
Por canal en 2 ohmios ............................... 80W, 0,3% DAT
Ponteado en 4 ohmios ............................. 160W, 0,3% DAT
Potencia máxima (a 14,4V)
MRV-1507
Por canal en 4 ohmios ............................................... 450W
Ponteado en 4 ohms................................................1500W
MRV-T757
Por canal en 4 ohmios ............................................... 225W
Ponteado en 4 ohms..................................................750W
MRV-F407 (CH-1 – CH-4)
Por canal en 4 ohmios ............................................... 120W
Ponteado en 4 ohms..................................................320W
Respuesta de frecuencia................10 Hz a 50 kHz (+0, –1 dB)
Relación señal/ruido
(con referencia a la potencia nominal)....................... 105 dBA
Factor de torsión ................................................. Mayor que 5
Factor de amortiguamiento
MRV-1507/MRV-757 .................................. Mayor que 500
MRV-F407 .................................................. Mayor que 100
Sensibilidad de entrada (para salida de potencia
nominal) ...................200mV a 4,0V (1,0V en el punto central)
Impedancia de entrada ............ Entrada de línea: 10k ohmios<
Impedancia de altavoz ........................ 4 o 2 ohmios (Estéreo),
4 ohmios (En puente)
Frecuencia y pendiente del filtro divisor
de frecuencia ........................... 50 a 200 Hz, 12 dB por octava
MRV-1507/MRV-757 ........................... LP: 30 Hz a 200 Hz,
24 dB por octava (MONO)
HP: 30 Hz a 200 Hz, 12 dB por octava (ESTEREO)
MRV-F407 .............. 50 Hz a 400 Hz x 20, 12 dB por octava
Requisito de potencia .......................................... 11 – 16V CC
con conexión negativa a tierra
Dimensiones (An. x Al. x Pr.)
MRV-1507 ............................... 260mm x 60mm x 530mm
MRV-T757 ............................... 260mm x 60mm x 330mm
MRV-F407...............................260mm x 60mm x 330mm
Peso
MRV-1507 ............................................................... 8,8 kg
MRV-T757 .............................................................. 5,2 kg
MRV-F407............................................................... 5,3 kg
NOTA:
Con el propósito de introducir mejoras, las especificaciones y
el diseño del producto están sujetos a cambios sin previo aviso.
SPECIFICATIONS
Sortie de puissance: Puissance continue RMS (à 12,0V, 20 Hz à
20 kHz)
MRV-1507
Par canal à 4 ohms .................................150W, 0,04% DHT
Par canal à 2 ohms .................................. 300W, 0,3% DHT
En pont à 4 ohms .................................... 600W, 0,3% DHT
MRV-T757
Par canal à 4 ohms ...................................75W, 0,04% DHT
Par canal à 2 ohms .................................. 150W, 0,3% DHT
En pont à 4 ohms .................................... 300W, 0,3% DHT
MRV-F407 (CH-1 – CH-4)
Par canal à 4 ohms ...................................40W, 0,04% DHT
Par canal à 2 ohms .................................... 50W, 0,3% DHT
En pont à 4 ohms .................................... 100W, 0,3% DHT
Sortie de puissance: Puissance continue RMS (à 14,4V, 20 Hz à
20 kHz)
MRV-1507
Par canal à 4 ohms .................................225W, 0,04% DHT
Par canal à 2 ohms .................................. 450W, 0,3% DHT
En pont à 4 ohms .................................... 900W, 0,3% DHT
MRV-T757
Par canal à 4 ohms .................................100W, 0,04% DHT
Par canal à 2 ohms .................................. 200W, 0,3% DHT
En pont à 4 ohms .................................... 400W, 0,3% DHT
MRV-F407 (CH-1 – CH-4)
Par canal à 4 ohms ...................................60W, 0,04% DHT
Par canal à 2 ohms .................................... 80W, 0,3% DHT
En pont à 4 ohms .................................... 160W, 0,3% DHT
Puissance maximale (à 14,4V)
MRV-1507
Par canal à 4 ohms .................................................... 450W
En pont à 4 ohms .................................................... 1500W
MRV-T757
Par canal à 4 ohms .................................................... 225W
En pont à 4 ohms ...................................................... 750W
MRV-F407 (CH-1 – CH-4)
Par canal à 4 ohms .................................................... 120W
En pont à 4 ohms ...................................................... 320W
Réponse de fréquence ...................10 Hz à 50 kHz (+0, –1 dB)
Rapport signal/bruit
(par rapport à la puissance nominale) ....................... 105 dBA
Facteur de saut ....................................................... Plus que 5
Indice d’amortissement
MRV-1507/MRV-757 ..................................... Plus que 500
MRV-F407 ..................................................... Plus que 100
Sensibilité d’entrée (pour la sortie de puissance
nominale) .................... 200mV à 4,0V (1,0V à la position centrale)
Impédance d’entrée ...................... Entrée de ligne: 10k ohms<
Impédance de haut-parleur .................. 4 ou 2 ohms (Stéréo),
4 ohms (En pont)
Fréquence et pente du diviseur de fréquence active
MRV-1507/MRV-757 ........................... LP: 30 Hz à 200 Hz,
24 dB/octave (MONO)
HP: 30 Hz à 200 Hz, 12 dB/octave (STEREO)
MRV-F407 .................... 50 Hz à 400 Hz x 20, 12 dB/octave
Alimentation nécessaire ...................................... 11 – 16V CC
à la terre négative
Dimensions (L x H x P)
MRV-1507 ............................... 260mm x 60mm x 530mm
(10-3/16" x 2-3/8" x 20-7/8")
MRV-T757 ............................... 260mm x 60mm x 330mm
(10-3/16" x 2-3/8" x 13")
MRV-F407...............................260mm x 60mm x 330mm
(10-3/16" x 2-3/8" x 13")
Poids
MRV-1507 .......................................... 8,8 kg (19 li., 6 on.)
MRV-T757 ......................................... 5,2 kg (11 li., 7 on.)
MRV-F407........................................5,3 kg (11 li., 10 on.)
REMARQUE:
Afin d'améliorer ce produit, les spécifications et la conception
sont sujettes à des modifications sans préavis.
SPECIFICATIONS
Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20
kHz)
MRV-1507
Per channel into 4 ohms ......................... 150W, 0.04% THD
Per channel into 2 ohms .......................... 300W, 0.3% THD
Bridged into 4 ohms ................................ 600W, 0.3% THD
MRV-T757
Per channel into 4 ohms ........................... 75W, 0.04% THD
Per channel into 2 ohms .......................... 150W, 0.3% THD
Bridged into 4 ohms ................................ 300W, 0.3% THD
MRV-F407 (CH-1 – CH-4)
Per channel into 4 ohms ........................... 40W, 0.04% THD
Per channel into 2 ohms ............................ 50W, 0.3% THD
Bridged into 4 ohms ................................ 100W, 0.3% THD
Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20
kHz)
MRV-1507
Per channel into 4 ohms ......................... 225W, 0.04% THD
Per channel into 2 ohms .......................... 450W, 0.3% THD
Bridged into 4 ohms ................................ 900W, 0.3% THD
MRV-T757
Per channel into 4 ohms ......................... 100W, 0.04% THD
Per channel into 2 ohms .......................... 200W, 0.3% THD
Bridged into 4 ohms ................................ 400W, 0.3% THD
MRV-F407 (CH-1 – CH-4)
Per channel into 4 ohms ........................... 60W, 0.04% THD
Per channel into 2 ohms ............................ 80W, 0.3% THD
Bridged into 4 ohms ................................ 160W, 0.3% THD
Max. Power (at 14.4V)
MRV-1507
Per channel into 4 ohms ............................................ 450W
Bridged into 4 ohms ................................................ 1500W
MRV-T757
Per channel into 4 ohms ............................................ 225W
Bridged into 4 ohms .................................................. 750W
MRV-F407 (CH-1 – CH-4)
Per channel into 4 ohms ............................................ 120W
Bridged into 4 ohms .................................................. 320W
Frequency Response ................... 10 Hz to 50 kHz (+0, –1 dB)
Signal-to-Noise Ratio
(referenced to rated power) ........................................ 105 dBA
Slew factor ........................................................ Greater than 5
Damping factor
MRV-1507/MRV-757 ................................ Greater than 500
MRV-F407 ................................................ Greater than 100
Input Sensitivity (for rated power
output) ........................ 200mV to 4.0V (1.0V at center detent)
Input Impedance ....................................... Line in: 10k ohms<
Speaker Impedance ............................... 4 or 2 ohms (Stereo),
4 ohms (Bridged)
Active Dividing Network Frequency and Slope
MRV-1507/MRV-757 .......................... LP: 30 Hz to 200 Hz,
24 dB per octave (MONO)
HP: 30 Hz to 200 Hz, 12 dB per octave (STEREO)
MRV-F407 ............. 50 Hz to 400 Hz x 20, 12 dB per octave
Power Requirement .................. 11 – 16V DC Negative Ground
Dimensions (W x H x D)
MRV-1507 ............................... 260mm x 60mm x 530mm
(10-3/16" x 2-3/8" x 20-7/8")
MRV-T757 ............................... 260mm x 60mm x 330mm
(10-3/16" x 2-3/8" x 13")
MRV-F407............................... 260mm x 60mm x 330mm
(10-3/16" x 2-3/8" x 13")
Weight
MRV-1507 ..........................................8.8 kg (19 lbs. 6 oz)
MRV-T757 .........................................5.2 kg (11 lbs. 7 oz)
MRV-F407........................................5.3 kg (11 lbs. 10 oz)
NOTE:
For product improvement, specifications and design are sub-
ject to change without notice.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine mrv 1507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine mrv 1507 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info