Zoom out
Zoom in
Previous page
1/12
Next page
English
Deutsch
Español
Italiano
Svenska
Français
R
Guide for Installation and Connections
DVI-9990R
DVD-Audio/Video Tuner
Hinweise über die Installation und Anschlüsse
Guide d’installation et de connexions
Guía de instalación y conexiones
Guida all’installazione ed ai collegamenti
Vägledning för montering och anslutningar
1


Need help? Post your question in this forum.

Forumrules


Content of pages


  • Page 1

    R

    DVI-9990R
    DVD-Audio/Video Tuner

    Guide for Installation and Connections

    English

    Hinweise über die Installation und Anschlüsse

    Deutsch

    Guide d’installation et de connexions

    Français

    Guía de instalación y conexiones

    Español

    Guida all’installazione ed ai collegamenti

    Italiano

    Vägledning för montering och anslutningar

    Svenska



  • Page 2

    PRECAUTIONS
    GUIDE FOR INSTALLATION AND CONNECTIONS
    • Please read this GUIDE FOR INSTALLATION AND CONNECTIONS and the OWNER’S
    MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope
    that your new DVI-9990R will give you many years of listening enjoyment.
    In case of problems when installing your unit, please contact your authorized ALPINE dealer.

    Points to Observe for Safe Usage
    • Read this manual carefully before starting operation and use this system safely. We cannot be
    responsible for problems resulting from failure to observe the instructions in this manual.
    • This manual uses various pictorial displays to show how to use this product safely and to avoid
    harm to yourself and others and damage to your property.
    Here is what these pictorial displays mean. Understanding them is important for reading this
    manual.
    • Meaning of displays

    Warning

    This symbol means important instructions. Failure to heed them can
    result in serious injury or death.

    Caution

    This symbol means important instructions. Failure to heed them can
    result in injury or property damage.

    Warning
    DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.
    USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may
    result in fire or electric shock.
    MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in
    fire or product damage.
    USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are
    not sure.) Failure to do so may result in fire, etc.
    BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
    Failure to do so may result in electric shock or injury due to electrical shorts.
    DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange
    wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or
    wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals,
    etc. can be extremely hazardous.
    DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power
    to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire
    or electric shock.

    2-EN



  • Page 3

    DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the
    chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel
    lines, tanks or electrical wiring. Failure to take such precautions may result in fire.
    DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE
    GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other
    safety-related system), or tanks should NEVER be used for installations or ground connections.
    Using such parts could disable control of the vehicle and cause fire etc.
    DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside
    and may result in fire.
    KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
    DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS
    THE STEERING WHEEL OR SHIFTLEVER. Doing so may obstruct forward vision or hamper
    movement etc. and results in serious accident.

    Caution
    HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of
    this unit requires special technical skill and experience. To ensure safety, always contact the
    dealer where you purchased this product to have the work done.
    USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only
    the specified accessory parts. Use of other than designated parts may damage this unit internally
    or may not securely install the unit in place. This may cause parts to become loose resulting in
    hazards or product failure.
    ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.
    Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed
    edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in
    metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of
    the hole.
    DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit
    in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit
    may result in product failure.

    Precautions
    • Be sure to disconnect the cable from the (–) battery post before installing your DVI-9990R. This
    will reduce any chance of damage to the unit in case of a short-circuit.
    • Be sure to connect the color coded leads according to the diagram. Incorrect connections may
    cause the unit to malfunction or damage to the vehicle’s electrical system.
    • When making connections to the vehicle’s electrical system, be aware of the factory installed
    components (e.g. on-board computer). Do not tap into these leads to provide power for this
    unit. When connecting the DVI-9990R to the fuse box, make sure the fuse for the intended
    circuit of the DVI-9990R has the appropriate amperage. Failure to do so may result in damage
    to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.
    • The DVI-9990R uses female RCA-type jacks for connection to other units (e.g. amplifier)
    having RCA connectors. You may need an adaptor to connect other units. If so, please contact
    your authorized ALPINE dealer for assistance.

    3-EN



  • Page 4

    Contents

    PRECAUTIONS

    2

    Accessories

    5

    Installation

    6

    Connections

    9

    Connections with other equipments

    10

    • To use this unit, a Multimedia Manager (PXI-H990, sold separately) or DAC unit (DAI-C990,
    sold separately) is required. This unit is powered by connecting with the PXI-H990 or DAIC990.

    IMPORTANT
    Please note the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

    SERIAL NUMBER:
    INSTALLATION DATE:
    INSTALLATION TECHNICIAN:
    PLACE OF PURCHASE:

    To prevent external noise from entering the audio system.
    • Locate the unit and route the leads at least 10 cm away from the car harness.
    • Keep the battery power leads as far away from other leads as possible.
    • Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if
    necessary) of the car chassis.
    • If you add an optional noise suppressor, connect it as far away from the unit as possible.
    Your Alpine dealer carries various noise suppressors. Contact them for further information.
    • Your Alpine dealer knows best about noise prevention measures so consult your dealer for
    further information.

    4-EN



  • Page 5

    Accessories
    Power cable

    RCA Extension
    cable (video)

    S video cable

    Flat screw
    (M5 x 6)

    Rubber Cap

    x4
    Hex Bolt

    ISO Antenna
    Convertor plug

    Front frame

    Parts for remote control
    Remote control

    Battery (AAA)

    Reinforcement screw
    (M3 x 12)

    Remote control holder

    x2

    Double-sided
    adhesive tape

    5-EN



  • Page 6

    Installation
    Installation Location
    Before deciding on the mounting location, check that opening and closing the display will not
    hamper gear shifting in that position.

    • Install at an angle of within 35 degrees from the horizontal.

    1
    Rubber Cap (Included)

    Bracket

    Hex Bolt (Included)
    Dashboard
    Mounting Sleeve
    (Included)
    DVI-9990R

    Remove the Detachable Front Panel (refer to page 9 of Owner’s Manual). Remove the front
    frame from main unit (see “Removal” on page 7).
    Slide the mounting sleeve into the dashboard.

    2

    Hex Nut (M5)

    Screw
    ★★

    Metal Mounting
    Strap

    Bolt Stud



    Ground Lead
    DVI-9990R
    Chassis
    When your vehicle has the bracket, mount the long hex bolt onto the rear panel of the DVI9990R and put the rubber cap on the hex bolt. If your vehicle does not have the mounting
    support, reinforce the monitor unit with the metal mounting strap (not supplied). Connect the
    ground lead of the unit to a clean metal spot using a screw (★) already attached to the
    vehicle’s chassis.
    • For the screw marked ★★, use an appropriate screw for the chosen mounting location.
    Connect each input lead coming from the product you are connecting with to the corresponding output lead coming from the left rear of the DVI-9990R. Connect all other leads of the DVI9990R according to details described in the “Connections” section.

    6-EN



  • Page 7

    3
    Slide the DVI-9990R into the dashboard. When the unit is in place, make sure the locking pins
    are fully seated in the down position. This can be done by pressing firmly in on the unit while
    pushing the locking pin down with a small screwdriver. This ensures that the unit is properly
    locked and will not accidentally come out from the dashboard. Install the Detachable Front
    Panel.

    Lock pin

    Removal
    1 Remove the DETACHABLE FRONT PANEL.
    2 Use a small screwdriver (or similar tool) to push the locking pins to the “up” position (see above
    drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock
    before unlocking the second pin.
    3 Pull the unit out, keeping it unlocked as you do so.
    < JAPANESE CAR >

    Front Frame

    DVI-9990R

    Ground Lead

    Screws (M5 x 6)
    (Included)



    Mounting Bracket
    NOTE
    Connect the ground lead of the unit to a clean metal spot using a screw (★) already attached to the vehicle's chassis.

    7-EN



  • Page 8

    Mounting the remote control holder
    • If the remote control is in direct sunlight, remove it from the holder and keep it in the glove
    box.
    • When the holder cannot be mounted securely with Velcro tape, mount it by using screws.
    Reinforcement Screws
    Remote Control
    Remote Control
    Holder
    Protective paper
    Console Box etc.

    8-EN



  • Page 9

    Connections
    • Basic Connection
    Color Cable
    Yellow

    Cable Specifications
    • Video output connector
    Outputs a video signal.
    Connects to the video input of the TV monitor you are linking with.
    • There is a copy protect signal included in the video output signal, so that recording
    with a VCR (Video Cassette Recorder) etc., is not possible.
    Also, depending on the monitor, the picture may not be displayed correctly.

    • IONBUS terminal
    Connects with IONBUS compatible products.

    • S video output terminal
    Outputs a video signal.
    Connects with ALPINE products with a S video input terminal.

    • DVD Audio Link terminal
    Connects with the DVD Audio Link terminal of the PXI-H990 Multimedia Manager or
    DAI-C990 DAC unit.
    (Connect when using a DVD audio disc. Remove the terminal cover and plug in the
    DVD Audio Link cable).
    • Antenna Receptacle

    Blue

    Orange

    Black
    Power supply unit
    Red

    Yellow

    • Power Antenna Lead
    Connect this lead to the +B terminal of your power antenna, if applicable.
    • Illumination Lead
    This lead may be connected to the vehicle’s instrument cluster illumination lead.
    This will allow the backlighting of the DVI-9990R to dim whenever the vehicle’s
    lights are turned on.
    • Ground Lead
    Connect this lead to a good chassis ground on the vehicle. Make sure the
    connection is made to bare metal and is securely fastened using the sheet metal
    screw provided.
    • Switched Power Lead (Ignition)
    Connect this lead to an open terminal on the vehicle’s fuse box or another unused
    power source which provides (+)12V only when the ignition is turned on or in the
    accessory position.
    • Battery Lead
    Connect this lead to the positive (+) post of the vehicle’s battery.

    Fuse
    (7.5A)

    NOTES
    • Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air
    conditioner. This may cause a malfunction.
    • Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.
    • The power supply unit temperature can become hot. This is not a malfunction.

    9-EN



  • Page 10

    Connections with other equipments
    • System Connection <Example 1>
    Connectable system products
    IONBUS compatible monitor
    Multimedia Manager or DAC unit
    Ai-NET/IONBUS converter
    Ai-NET compatible changer
    DAB Receiver Box

    System switch
    “1 (SYSTEM)”
    selected

    *

    IONBUS
    compatible
    monitor
    (TMI-M990)
    (sold separately)

    TMI-M990
    PXI-H990 or DAI-C990
    KCI-500B
    CHA-S634 or CHA-1214
    TUA-T100DAB

    DVD Audio Link cable
    (Included with the PXI-H990 or DAI-C990)
    To DVD Audio Link
    terminal

    Multimedia Manager
    PXI-H990
    or
    DAC unit
    DAI-C990
    (sold separately)

    To
    IONBUS terminal

    IONBUS
    compatible
    monitor box

    *

    *

    IONBUS cable
    (Included with the
    TMI-M990)

    To
    IONBUS
    terminal

    To IONBUS
    terminal

    System switch (PXI-H990 only)
    • Set to SINGLE when
    connecting one PXI-H990.
    • When connecting two PXIH990s, set the first to FRONT,
    and the second to REAR.

    When connecting the changer or
    DAB Receiver Box, you must
    use an Ai-NET/IONBUS converter
    (KCI-500B).

    IONBUS cable
    (Included with the KCI-500B)
    *

    IONBUS cable

    S video cable (Included)

    *

    To
    IONBUS
    terminal
    Ai-NET/IONBUS
    converter
    (KCI-500B)
    (sold separately)

    *

    Antenna Receptacle
    Blue

    POWER ANT

    Orange

    ILLUMINATION

    <DVI-9990R>

    Black
    Red
    Yellow
    Power supply unit

    GND

    CD changer
    (Ai-NET)
    or
    DAB
    Receiver Box
    (sold
    separately)

    To Ai-NET
    connector

    Ai-NET cable
    (Included with CD changer or DAB Receiver Box)

    To antenna plug of the vehicle
    To power antenna

    To the instrument cluster illumination lead
    Connect to a metal part of chassis body with a screw.

    IGNITION
    BATTERY

    Ignition Key

    Fuse (7.5A)

    Battery

    NOTES
    • Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air
    conditioner. This may cause a malfunction.
    • Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.
    • The power supply unit temperature can become hot. This is not a malfunction.
    * For the Ferrite Core, refer to the Owner’s Manual of the product that the IONBUS cable is attached to.

    10-EN



  • Page 11

    • System Connection <Example 2>
    Connectable system products
    PXI-H990 or DAI-C990
    IONBUS incompatible
    TV monitor

    Multimedia Manager or DAC unit
    External TV monitor

    RCA Extension cable (video)
    (Included)

    Video output connector

    External TV
    monitor
    (sold separately)

    Yellow
    To DVD Audio Link
    DVD Audio Link cable
    terminal
    (Included with the PXI-H990 or DAI-C990)
    Multimedia Manager
    PXI-H990
    or
    IONBUS cable
    DAC unit
    (Included with the PXI-H990 or DAI-C990)
    DAI-C990
    (sold separately)
    *
    To IONBUS
    terminal

    System switch (PXI-H990 only)
    • Set to SINGLE when
    connecting one PXI-H990.
    • When connecting two PXIH990s, set the first to FRONT,
    and the second to REAR.

    *

    Antenna Receptacle
    To antenna plug of the vehicle
    Blue

    POWER ANT

    Orange

    ILLUMINATION

    To power antenna

    To the instrument cluster illumination lead
    Black

    GND

    Connect to a metal part of chassis body with a screw.
    Red

    IGNITION

    Ignition Key
    Yellow
    Power supply unit

    BATTERY

    Fuse (7.5A)

    Battery

    NOTES
    • Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air
    conditioner. This may cause a malfunction.
    • Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.
    • The power supply unit temperature can become hot. This is not a malfunction.
    * For the Ferrite Core, refer to the Owner’s Manual of the product that the IONBUS cable is attached to.

    11-EN



  • Page 12

    R

    ALPINE ELECTRONICS MARKETING, INC.
    1-1-8 Nishi Gotanda,
    Shinagawa-ku, Tokyo 141-0031, Japan
    Phone 03-5496-8231
    ALPINE ELECTRONICS OF AMERICA, INC.
    19145 Gramercy Place, Torrance,
    California 90501, U.S.A.
    Phone 1-800-ALPINE-1 (1-800-257-4631)
    ALPINE ELECTRONICS OF CANADA, INC.
    7300 Warden Ave., Suite 203, Markham,
    Ontario L3R 9Z6, Canada
    Phone 1-800-ALPINE-1 (1-800-257-4631)
    ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
    6-8 Fiveways Boulevarde Keysborough,
    Victoria 3173, Australia
    Phone 03-9769-0000
    ALPINE ELECTRONICS GMBH
    Frankfurter Ring 117, 80807 München,
    Germany
    Phone 089-32 42 640
    ALPINE ELECTRONICS OF U.K. LTD.
    Alpine House
    Fletchamstead Highway,
    Coventry CV4 9TW, U.K.
    Phone 0870-33 33 763
    ALPINE ELECTRONICS FRANCE S.A.R.L.
    (RCS PONTOISE B 338 101 280)
    98, Rue de la Belle Etoile, Z.I. Paris
    Nord II, B.P. 50016, 95945 Roissy
    Charles de Gaulle Cedex, France
    Phone 01-48638989
    ALPINE ITALIA S.P.A.
    Viale C. Colombo 8, 20090 Trezzano
    Sul Naviglio (MI), Italy
    Phone 02-484781
    ALPINE ELECTRONICS DE ESPAÑA, S.A.
    Portal de Gamarra 36, Pabellón, 32
    01013 Vitoria (Alava) - APDO 133, Spain
    Phone 945-283588

    Sankei Kikaku Co., Ltd.
    1-13-38, Hinodai,
    Hino, Tokyo, Japan

    Designed by ALPINE Japan
    Printed in Japan (S)
    68-00323Z08-A






Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine dvi 9990 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine dvi 9990 r in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine dvi 9990 r

Alpine dvi 9990 r User Manual - English - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info