536904
16
Zoom out
Zoom in
Previous page
1/34
Next page
16-EN
10 typical equalizer settings are preset at the factory for a variety of
musical source material. USER settings are created in the 3BAND EQ
mode.
Setting item: EQ PRESETS
Setting contents:
USER / FLAT (Initial setting) / POPS / ROCK / NEWS / JAZZ /
ELEC DANCE / HIP HOP / EASY LIS / COUNTRY / CLASSICAL
This unit has a BASS ENGINE SQ feature for Sound adjustment.
Setting item: BASS ENGIN
Setting contents:
OFF (Initial setting) / ON
OFF (MANUAL SET mode):
Adjust each audio effect setting separately.
ON (BASS ENGINE SQ mode):
Adjust the Bass relative audio effect settings uniformly by
adjusting the BASS ENGINE SQ Level (page 18).
Notes
You can also set BASS ENGINE SQ ON/OFF directly by pressing and
holding BASS. Refer to “Setting BASS ENGINE SQ ON/OFF” on
page 18.
” indicator lights up when BASS ENGINE SQ mode is ON.
With BASS ENGINE SQ ON, adjusting the BASS ENGINE SQ Level
uniformly effects various sound parameters for optimum Bass effect.
Refer to “Adjusting BASS ENGINE SQ Level” on page 18.
Loudness introduces a special low-and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
Setting item: LOUDNESS
Setting contents:
LOUD OFF (Initial setting) / LOUD ON
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. The setting of Bass, Mid and Treble can
be adjusted in this mode.
Setting item: 3BAND EQ
Further setting items: BASS / MID / TREBLE
Setting the Control
1
After selecting BASS/MID/TREBLE from the 3BAND EQ
adjustment mode, turn the Rotary encoder to select the
desired setting item, and then press ENTER.
WIDTH (Q) CENTER FRQ LEVEL
2
Turn the Rotary encoder to select the desired setting
value, and then press ENTER.
3
Press r to return to the previous step.
Setting the Bandwidth (WIDTH (Q))
Changes the boosted bandwidth to wide or narrow. A wider setting will
boost a wide range of frequencies above and below the centre frequency.
A narrower setting will boost only frequencies near the centre
frequency.
Setting the Centre Frequency (CENTER FRQ)
Emphasises the displayed frequency ranges.
Setting the Level
You can emphasise or weaken the level.
Note
The adjustment can also be made by pressing AUDIO. Refer to
Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/Balance
(Between Left and Right)/Fader (Between Front and Rear)/Loudness/
Defeat” on page 15.
The output level of each source is individually adjustable. For example, if
the TUNER level sounds lower than CD, its output can be adjusted
without affecting the other sources.
Setting item: SOURCE VOL
Further setting items: TUNER / DISC
*1
/ USB / iPod
*2
/ AUX
Setting contents:
−14 dB ~ +14 dB
*1 CDE-182R/CDE-181 Series/CDE-180 Series.
*2 CDE-182R/CDE-181 Series only.
When the subwoofer is on, you can adjust the subwoofer output level
(refer to “Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and Rear)/
Loudness/Defeat” on page 15).
Setting item: SUBWOOFER
Setting contents:
OFF / ON (Initial setting)
OFF:
No subwoofer signal is output from the Subwoofer RCA
Connectors (refer to “Connections” on page 33).
ON:
The subwoofer signal is output from the Subwoofer RCA
Connectors (refer to “Connections” on page 33).
Equalizer Presets
Setting BASS ENGINE SQ ON/OFF
Turning Loudness On/Off
Adjusting the Parametric Equalizer Curve
(3BAND EQ)
BASS
WIDE 0.50 MEDIUM 1.00 MEDIUM 1.50
NARROW 2.00
MID
WIDE 0.75 MEDIUM 1.00 MEDIUM 1.25
NARROW 1.50
TREBLE WIDE 0.75 NARROW 1.25
BASS 60 (Hz) 80 (Hz) 100 (Hz) 120 (Hz)
MID 500 (Hz) 1.0K (Hz) 1.5K (Hz) 2.5K (Hz)
TREBLE 7.5K (Hz) 10.0K (Hz) 12.5K (Hz) 15.0K (Hz)
BASS −7 ~ +7
MID −7 ~ +7
TREBLE −7 ~ +7
Setting the Source Volume Level
Turning Subwoofer ON/OFF
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-180R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-180R in the language / languages: English as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-180R

Alpine CDE-180R Quick start guide - English - 76 pages

Alpine CDE-180R User Manual - German - 35 pages

Alpine CDE-180R Quick start guide - German, Dutch - 76 pages

Alpine CDE-180R User Manual - Dutch - 35 pages

Alpine CDE-180R Quick start guide - French, Italian, Polish, Swedish, Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info