536969
30
Zoom out
Zoom in
Previous page
1/46
Next page
30-EN
Notes
Change to a source other than the USB Memory mode, then remove the
USB Memory. If the USB Memory is removed in the USB Memory
mode, data may be damaged.
When removing USB Memory, pull it out straight.
If sound is not output or USB Memory is not recognized even when
USB Memory is connected, remove USB Memory once, and then
reconnect.
After removing the USB Memory, close the cover of the USB Connection
Terminal to prevent dust or foreign objects from entering and causing a
malfunction.
On how to connect a USB Memory to Rear USB Connector, refer to
“Rear USB Memory Connection (sold separately)” on page 43.
Using the USB Memory Banking Function
When a USB Memory is connected, the follows description is available
only when TAG is set in “Setting the USB Search Mode” (refer to
“Setting the USB Search Mode” on page 22).
What is a Bank?
A bank is a unit of up to 1,000 songs, which is stored in memory.
“BANKING” refers to the grouping of songs available in USB Memory, in
banks of 1,000 songs each. However, unless the following estimates are
followed, the total number of songs stored could be less.
Playlists: 20 (32 characters; 64 bytes)
Genres: 10 (32 characters; 64 bytes)
Composers: 30 (32 characters; 64 bytes)
Artists: 30 (32 characters; 64 bytes)
Albums: 100 (32 characters; 64 bytes)
Titles: 1,000 (32 characters; 64 bytes)
Folders: 100 (32 characters; 64 bytes)
Files: 1,000 (32 characters; 64 bytes)
File Paths: 1,000 (128 characters; 256 bytes)
About Banking
While a bank is being built up, “BANKING” is displayed. Banking occurs
whenever a USB Memory device is connected or after power to the
head unit turns on.
It can take anywhere from a few seconds to up to several minutes for
banking to complete. This depends on the number of files and folders
in USB Memory.
Available operations while Banking
During Banking, the information display changes so the VIEW
operation is not available.
With a song playing, Regular fast-forwarding and next song selection is
available.
While Banking, the song playback order may differ from the song order
in the USB Memory device.
Searching is not recommended during the Banking process as the
database is under construction at this time, and malfunction may result
in some cases.
This unit has a BANK function that automatically divides every 1,000
songs stored in USB Memory into individual banks to make searching
and playing back a song easier. A maximum of 1,000 songs for one bank
can be stored according to the order stored in USB Memory. A
maximum of 20 banks (20,000 songs) can be recognized.
Playback
1
Press SOURCE to select the USB mode.
Depending on which USB Connector you used, press BAND/F/R
to switch USB source between FRONT and REAR.
2
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
3
To pause playback, press .
Pressing again will resume playback.
Notes
Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
If there is tag information, artist name/album name/track name is
displayed.
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name, artist
name, and album name). All other tag data is ignored.
NO SUPPORT” is displayed when text information is not compatible
with this unit.
Before disconnecting USB Memory, be sure to change to another source
or set to pause.
•Press VIEW to switch the display. For details, refer to “Displaying the
Text on page 19.
Searching for a desired Song
You can select to search a song by Tag information or (FILE NAME)
mode. Before you search a song, select your desired search mode in
“Setting the USB Search Mode” (refer to “Setting the USB Search Mode
on page 22).
Before performing the following procedures, make sure TAG is selected
in “Setting the USB Search Mode” (refer to “Setting the USB Search
Mode” on page 22).
A Flash Memory Device can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this units
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Bank
*1
/
Playlists/Artists/Albums/Songs/Genres/Composers/Folders/Files search
mode to narrow searches based on the table below.
*1 A maximum of 1,000 songs for one bank can be stored according to
the order stored in Flash Memory. However, song stored order in bank
may differ from the song order in the Flash Memory device in some
case.
Bank No. Song number
Bank1 1~1,000
Bank2 1,001~2,000

Bank20 19,001~20,000
Searching by Tag information
Hierarchy
1
Hierarchy
2
Hierarchy
3
Hierarchy
4
Hierarchy
5
Bank
*1
Playlist Song
Bank
*1
Artist
*
Album
*
Song
Bank
*1
Album
*
Song
Bank
*1
Song———
Bank
*1
Genre
*
Artist
*
Album
*
Song
Bank
*1
Composer
*
Album
*
Song
Bank
*1
Folder File
Bank
*1
File———
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-135BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-135BT in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-135BT

Alpine CDE-135BT User Manual - German - 53 pages

Alpine CDE-135BT User Manual - Dutch - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info