536969
9
Zoom out
Zoom in
Previous page
1/46
Next page
9-EN
Accessory List
Head Unit ..................................................................................1
Power Cable ..............................................................................1
Microphone ..............................................................................1
USB extension cable.................................................................1
Mounting Sleeve ......................................................................1
Carrying Case............................................................................1
Rubber Cap ...............................................................................1
Hex Bolt.....................................................................................1
Screw (M5 × 8) ..........................................................................4
Owner’s Manual..................................................................1 set
Turning Power On and Off
Press SOURCE to turn on the unit.
Note
The unit can be turned on by pressing any other button except and
e (Release).
Press and hold SOURCE for at least 2 seconds to turn
off the unit.
Note
The first time power is turned on, the volume will start from level 12.
Source Selection
Press SOURCE to change the source.
TUNER DISC USB FRONT
*1
/iPod FRONT
*2
VTUNER F
*3
BT AUDIO
*4
AUXILIARY
*5
TUNER
*1 Displayed only when no iPod/iPhone is connected. During USB
FRONT source, you can switch to USB REAR source by pressing
BAND/F/R.
*2 Displayed only when the iPod/iPhone is connected. During iPod
FRONT source, you can switch to iPod REAR source by pressing
BAND/F/R when an iPod/iPhone is connected to Rear USB
Connector.
*3 Displayed only when VTUNER is set to ON, refer to “Setting the
vTuner Source” on page 23. During VTUNER F source, you can
switch to VTUNER R source by pressing BAND/F/R.
*4 Displayed only when AUDIO is set to ON, refer to “Setting the
BLUETOOTH Connection (BT IN)” on page 24.
*5 Refer to “Using the Front AUX Input Terminal” on page 20.
Detaching and Attaching the Front Panel
1
Turn off the unit power.
2
Press e (Release) at the lower left side until the front
panel pops out.
3
Grasp the left side of the front panel and pull it out.
Notes
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
To protect the front panel, place it in the supplied carrying case.
When detaching the front panel, do not apply excessive force as it may
result in malfunction.
1
Insert the right side of the front panel into the main unit.
Align the groove on the front panel with the projections
on the main unit.
2
Push the left side of the front panel until it locks firmly into
the main unit.
Notes
Before attaching the front panel, make sure that there is no dirt or dust
on the connector terminals and no foreign object between the front
panel and the main unit.
Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
1
Turn off the unit power.
2
Remove the detachable front panel.
Getting Started
SOURCE/
BAND/F/R
e
FUNC./VIEW
6/DIMMER
Rotary encoder
Detaching
Attaching
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-135BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-135BT in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-135BT

Alpine CDE-135BT User Manual - German - 53 pages

Alpine CDE-135BT User Manual - Dutch - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info