168426
29
Zoom out
Zoom in
Previous page
1/36
Next page
28-EN
01GB06CDA-9854R.fm
ALPINE CDA-9852R 68-04123Z53-B (EN)
Installation
Accessory List
Head unit .............................................................................1
Power cable .........................................................................1
Mounting sleeve...................................................................1
Carrying case ......................................................................1
Rubber Cap .........................................................................1
Hex Bolt ...............................................................................1
Screw (M5 × 8) ....................................................................4
Owner’s Manual.............................................................1 set
The main unit must be mounted within 35 degrees of the horizontal
plane, back to front.
Removal
1. Remove the detachable front panel.
2. Use a small screwdriver (or similar tool) to push the
locking pins to the “up” position (see above drawing).
As each pin is unlocked, gently pull out on the unit to
make sure it does not re-lock before unlocking the
second pin.
3. Pull the unit out, keeping it unlocked as you do so.
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
1
Slide mounting sleeve from main unit (see
“Removal” on page 28). Slide the mounting sleeve
into the dashboard and fix it with the metal shackles.
Detachable
Front panel
Less than 35°
Bracket
Rubber Cap
(Included)
Hex Bolt
(Included)
this unit
Dashboard
Mounting sleeve
(Included)
2
When your vehicle has the Bracket, mount the long
hex bolt onto the rear panel of the CDA-9854R/
CDA-9852RB/CDA-9852RR and put the Rubber Cap
on the hex bolt. If your vehicle does not have the
Mounting Support, reinforce the head unit with the
metal mounting strap (not supplied). Connect all the
leads of the CDA-9854R/CDA-9852RB/CDA-9852RR
according to details described in the CONNECTION
section.
For the screw *, provide a proper screw to the chassis installing
location.
3
Slide the CDA-9854R/CDA-9852RB/CDA-9852RR into
the dashboard. When the unit is in place, make sure
the locking pins are fully seated in the down
position. This can be done by pressing firmly in on
the unit while pushing the locking pin down with a
small screwdriver. This ensures that the unit is
properly locked and will not accidentally come out
from the dashboard. Install the Detachable Front
Panel.
Metal Mounting Strap
Screw
Bolt Stud
this unit
Hex Nut (M5)
Lock pin
01GB00CDA-9854R.book Page 28 Thursday, November 10, 2005 2:42 PM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine cda 9854 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine cda 9854 r in the language / languages: English, German, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info