506649

Alpina SF 9381 Manual

2
Zoom out
Zoom in
Previous page
1/9
Next page
ENGLISH
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should be followed:
1. Read all instructions carefully.
2. Make sure the power supply corresponds to one on the rating label.
3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
4. Do not allow children to operate or play with the appliance.
5. Unplug from outlet when not in use, or before putting on/taking off parts.
6. Do not use with damaged electrical cord or plug.
7. If damaged or malfunction occur, refer to an authorized service center only.
8. Never pull the appliance by power cord.
9. Do not use the appliance for other than intended household use.
Parts Description
1. Thermostat
2. Heating Power Knob
3. Oscillation Control Button
4. Body
5. Guard
Read These Instructions
1. Once plugged turn the thermostat to the position "+", then turn the switch to the "FAN" position, the heater will
works at the cool windy.
2. Then turn the switch to the "I" position, the heater will works at the low heat situation.
3. Then turn the switch to the "II" position, the heater works at the high heat situation.
4. Turn on the switch on the back of the heater and the body can oscillate in the range of 90 degrees when rotating.
5. If you want to turn off the heater please turn the switch to the "FAN" position, working 3 minutes first. Then turn
the switch to "OFF" position.
Instruction for Use
1. This heater adapts only in the 220~240V voltage. Don’t use the outlet with other electric appliance altogether
and the outlet must can endure 10A or above current.
2. Do not place the warmer under the fixed power outlet.
3. Never use the warm when the power wire, plug or the body is damaged.
4. When user need going out or not being used for a long time, the plug should be disconnect from the power
outlet.
5. Do not cover or put anything on the heater and don’t use it nearby the bed when going out or sleeping so as to
avoid Risk of fire.
6. Put the heater in a place where children can’t reach ouch when using or storage.
7. Never turn the “I” or “II” switch when the fan-motor can’t work normally.
8. Do not operate the warmer including switches, plugs and outlets with wet hands.
9. Do not use the warmer in the bathroom or swimming pool.
Warning:
This appliance is equipped with a grounded, Type G, 3-pin power supply cord. This is a safety feature. Do not attempt
to defeat the safety purpose of this plug.
Cleaning and Maintenance
1. Always make sure the appliance is unplugged from outlet before cleaning.
2. The dustproof wet on the back of the heater can be cleaned by taking it off towards and can be installed back.
3. The dust stain in the body of the heater can be scraped softly or sucked away with the dust collector.
4. Do not damage the components of the heater.
5. When the unit is not to be use for a longer time, clean it and seal in a plastic bag then store in a dry place, packed
it according to its packing method.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina SF 9381 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SF 9381 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info