661864
3
Zoom out
Zoom in
Previous page
1/19
Next page
Instructions for use
1. Make sure the power supply corresponds to one’s on the rating label with the thermostat control
switch in the low position and the power setting switches in the 0 position.
2. Insert the plug into the socket (requirements for socket and power cord: AC 220-240V, 50Hz, ≥10A).The
heater must not be located below a fixed socket.
3. Switch the heater to one of the following power settings: the power switch lights up when
activated.
a. Push switch one (I) for 300watts
b. Push switch two (II) for 600watts
4. Room temperature can be adjusted using the thermostat. Simply turn the thermostat knob clockwise to
increase the heat and anti-clockwise to decrease the temperature until you reach the desired
temperature.
5. Once you have finish using the heater, turn the power switches off and the thermostat control to low
position and unplug from the mains supply.
Circuit Diagram
Warning:
This appliance is equipped with a grounded, Type G, 2-pin power supply cord. This is a safety feature. Do not
attempt to defeat the safety purpose of this plug.
CLEANING & MAINTENANCE
1. Always make sure the appliance is unplugged from electrical outlet & sufficiently cool before
cleaning.
2. The dust stain in the body of the heater can be scraped softly or sucked away with the dust
collector.
3. Do not damage the components of the heater.
4. When the unit is not to be use for a longer time, clean it and seal in a plastic bag then store in a
dry place, packed it according to its packing method.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina SF-7656 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SF-7656 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info