661865
3
Zoom out
Zoom in
Previous page
1/19
Next page
3
ENGLISH
INSTRUCTION FOR USE
ASSEMBLY
1. Nip the two bottoms on both sides of the join of the tube, insert it into the suction hole on the main body and lock
it.
2. The connection between the bended tube and the flexible drawtube or section tube. Connect the bended tube to
the drawtube (or section tube), then turn them against each other to lock them firmly. When dissembling, just turn
them in the opposite direction to the above mentioned. Figure 1
3. The connection between the drawtube and the floor brush. Connect the drawtube into the tube of the floor brush,
and then turn them against each other to lock it firmly. When dissembling, just turn them in the opposite direction
to the above mentioned. Figure 2
4. The connection of drawtube and 2-in-1 brush connect the drawtube into the 2-in-1 floor brush, and then turn them
against each other to lock it firmly. When dissembling, just turn then in the opposite direction to the above
mentioned. Figure 3
1
2
3
HOW TO USE YOUR VACCUM CLEANER
1. Sweeping, power cord extraction and switch: Pull out plastic tube from the trough; lay down the cleaner on the floor.
Pull out all power cord conveniently by running the front fixture. Insert the plug into electrical outlet, press ON/OFF
to start or stop the appliance.
2. The vacuum has constant suction speed and there are no adjustments for it.
3. Suction power adjusting button: For certain material, e.g. curtain, silk, woolen cloth etc. full power suction may be
too strong to use. Then you may adjust the button on the bended tube to lower down the suction power. When the
hole on the tube seems larger, the suction power is lower, while contrarily larger. Figure 1
4. Use the 2-in-1 small brush to clean the corner and the places with aperture. Figure 2
5. The usage of floor brush when cleaning floor or any hard surface: push down the button to the side marked with
---“” When cleaning carpet, push down the button to the side marked with “” Figure 3
1
2
3
Warning:
VDE Plug
This appliance is equipped with a grounded, power supply cord. This is a safety feature. Do not attempt to defeat the
safety purpose of this plug.
BS Plug (optional)
If the product is fitted with a standard UK main outlet 3pin plug and the mains cable becomes damaged, it should be
replaced by a qualified electrician. If it is necessary to change the plug, the wiring instructions below must be followed at
all times. The fuse from the plug being replaced should be removed, as insertion into a mains supply socket would be
dangerous.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina SF-7650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SF-7650 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info