661835
3
Zoom out
Zoom in
Previous page
1/35
Next page
3
ENGLISH
Dear Customer,
Thank you for choosing this ALPINA home appliance. Your Alpina appliance comes with a 2 year warranty and will provide years of
service if looked after properly. The ALPINA name brings you Quality, Reliability and Dependability. We hope you will continue to
make ALPINA your first choice in home appliances.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should be followed:
1. Read all instructions carefully.
2. Make sure the power supply corresponds to one on the rating label.
3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
4. Do not allow children to operate or play with the appliance.
5. Unplug from outlet when not in use, or before putting on/taking off parts.
6. Do not use with damaged electrical cord or plug.
7. If damaged or malfunction occurs, refer to an authorized service center only.
8. Do not place on or near hot surfaces.
9. Never pull the appliance by the power cord.
10. Do not use the appliance for other than intended household use.
Accessories
Instruction for use
1. Inspect the clipper, make sure it is free of oil between the cutting blade teeth and turn the unit on to distribute the oil and to
make sure it is running smoothly. Wipe off any excess oil. This should be done after each use. While using the unit, untwist the
cord from time to time to avoid tangling.
2. Let the person to sit approximately at your eye level. This allows ease of visibility while cutting, and always comb the hair before
cutting so it is tangle free.
3. Place a towel around the neck and shoulders of the person having the haircut.
Hair Cut Instruction
1. Nape of the Neck: Attach comb attachment 3mm or 6mm. Hold the clipper cutting edge pointed up and begins the haircut,
starting at the centre of the head & the base of the neck. Continue to cut the back area from the bottom of the neck upwards to
the top of the ears. (Fig1)
2. Back of the Head: Change to the next longest comb attachment 9mm or 12mm and cut the back of the head. (Fig2)
3. Side of the Head: Change to one of the shorter combs 3mm or 6mm, trim sideburns, i.e. the hair directly in front of the ears.
Then change to one of the longer combs, 9mm or 12mm, and continue to cut to the top of the head. (Fig3)
4. Top of the Head: Using comb attachment 9mm or 12mm cut the top of head from back to front against the direction in which
the hair normally grows. In some cases, this may require the reverse, or cutting from front to back. (Fig4)
5. Finishing touch: Finally, use the taper lever without an attachment comb for close trimming around the base of the neck, the
sides of the neck and the ears. To take a clean straight line at the sideburns, reverse the hair clipper by turning the reverse side
uppermost. (Fig5)
Fig1 Fig2 Fig3 Fig4 Fig5
Warning:
This appliance is equipped with a grounded, Type G, 3-pin power supply cord. This is a safety feature. Do not attempt to defeat the
safety purpose of this plug.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina SF-5055 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SF-5055 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Swedish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info