731964
23
Zoom out
Zoom in
Previous page
1/27
Next page
10
a halt, so that it uses up all the fuel that is left
in the carburettor.
Wait for the engine to cool down before stor-
ing the machine.
When you wish to start using the machine again,
prepare it as indicated in chapter “2. Preparing
to work”.
6. EXTRAORDINARY MAINTENANCE
This work must be done exclusively by your
Dealer.
All and any operations performed in unauthor-
ised centres or by unqualied persons will totally
invalidate the warranty.
6.1 TUNING MINIMUM SPEED
WARNING! If the cutting device moves
when the engine is running idle, contact your
Dealer to correctly regulate the engine.
6.2 CARBURETTOR ADJUSTMENTS
The carburettor is tuned by the manufacturer to
achieve maximum performance in all situations,
with a minimum emission of toxic gas in compli-
ance with the regulations in force.
In the case of poor performance contact your
Dealer for a check of the carburation and engine.
7. DIAGNOSTICS
What to do when ...
Source of problem Corrective action
1. The engine will not start or will not keep running
Incorrect starting
procedure Follow the instructions
(see chapter 3)
Dirty spark plug
or incorrect distance
between the electrodes
Check the spark plug
(see chapter 5)
Air filter clogged Clean and/or replace
the filter (see chapter 5)
Carburation problems Contact your Dealer
2. The engine starts but is lacking in power
Air filter clogged Clean and/or replace
the filter (see chapter 5)
Carburation problems Contact your Dealer
3. The engine runs irregularly
and lacks in power when revved
Dirty spark plug
or incorrect distance
between the electrodes
Check the spark plug
(see chapter 5)
Carburation problems Contact your Dealer
4. The engine makes too much smoke
Incorrect composition
of the fuel mixture Prepare the fuel mixture
according to the instruc-
tions (see chapter 2)
Carburation problems Contact your Dealer
5. The cutting device must not move
when the engine is running idle
Incorrect carburation
regulation Contact your Dealer
6. The machine starts to vibrate abnormally
Damaged or loose parts Stop the machine and
disconnect the spark plug
cable
Inspect for damage
Check for and tighten any
loose parts
Have all checks, repair
work and replacements
carried out by a specialized
Centre only.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina ATR 26 J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina ATR 26 J in the language / languages: All languages as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info