731995

Alpina ASH 2.5 E Manual

21
Zoom out
Zoom in
Previous page
1/25
Next page
22
3.4
Emptying the box
Make sure the shredded material in the collection box do-
esn’t reach too high a level; if this happens, the shredded
material could clog the discharge chute, causing material
to back up through the feed opening.
To remove or empty the box, turn o the motor, lower the
safety handle (1) and take out the box (2).
3.5
Clogging of material
If material to be shredded becomes clogged, you can free
the shredding roller by reversing the rotation direction of
the motor . Therefore:
– reverse the rotation direction by pushing the black but-
ton (4-▲), taking care that material does not back up
from the feeding chute;
– a led (5) lights up to indicate that rotation is in the op-
posite direction.
– when you have unblocked the material, press the black
button (3-▼) to restore the operating rotation direction.
Stop the motor and disconnect from the mains supply if
you must unclog the chute and the material discharge
chute.
3.6
End of work
When you have nished work, stop the motor by pres-
sing the red button (2-O).
Disconnect the extension lead (11) BEFORE the general
mains socket (13) THEN from the machine plug (12).
Remove and empty the container.
4. STORAGE AND MAINTENANCE
IMPORTANT - Routine and accurate maintenance is
essential in maintaining original machine safety and
performance levels.
Store the machine in a dry place.
Disconnect the machine from the mains supply
before starting any cleaning, inspection or mainte-
nance activities.
1) Wear sturdy work gloves before cleaning, maintaining
or adjusting the machine.
2) After each use, remove the collection box and clean
the remaining debris in the discharge chute.
3) After each use, spray a light layer of biodegradable
oil on the shredding roller to protect the metal from
corrosion.
4) Always make sure the air vents are free of debris.
5) Do not spray water onto and avoid wetting the motor
and electrical components. Do not use harsh liquids to
clean plastic parts.
6) Do not attempt to carry out demanding repairs without
the necessary means and technical knowledge. All
work on the machine that is poorly executed automa-
tically voids the Warranty, releasing the Manufacturer
of all liability.
4.1
Distance adjustment
The distance between the pressure plate (2) and shred-
ding roller (3) must be adjusted before using the machine
for the rst time. Afterwards, it is necessary only when
shredding proves to be imperfect.
In order to set the plate (2) in an optimal position with
regard to the roller (3), you must:
– start up the motor to activate the shredding roller (3);
– turn the handwheel (1) slowly clockwise to bring the
plate (2) closer to the roller until you hear a scraping
sound between the two parts, demonstrated by small
metal shavings falling from the discharge chute.
Avoid excessive contact in order to prevent unnecessary
wear to the plate.
5. ENVIRONMENTAL PROTECTION
Environmental protection should be a priority of conside-
rable importance when using the machine, for the benet
of both society and the environment in which we live.
– Avoid causing any disturbance to the surrounding area.
– Scrupulously comply with local regulations for the di-
sposal of waste materials after working.
– Scrupulously comply with local regulations for the di-
sposal of packaging, deteriorated parts or any elements
with a strong environmental impact; this waste must not
be disposed of as normal waste, but must be separated
and taken to specied waste disposal centres where
the material will be recycled.
– When decommissioning, do not abandon the machine
in the environment, but hand it over to a disposal cen-
tre, in accordance with the local regulations in force.
For any doubts or problems, please do not hesitate to
contact your nearest Customer Service Centre or Your
Dealer.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina ASH 2.5 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina ASH 2.5 E in the language / languages: All languages as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info